92comanche4x4

all i really want is the tail light tail gate rear bumper doors and some interior parts

Ok the front on the backside of the axel said 30d so its a dana30 in the front and the rear id have to go look. but i tracked down a parts comanche for some other odds and ends i need but it only has a 4cyl but he also has cherokee front and rear axel he wasnt sure of the gear ratio so he was gonna call his friend he got them from also i have a 4.0 automatic and i am in lincoln park mi

could i use axels from a cherokee 4x4 with a 4.0 on my comanche 4x4 4.0 i was just woundering because I'm gonna need a front axel and i found a front and rear thats just been rebuiilt really cheap

o no i new there was more to it the lady from jeeperz creepers tryed talkin me outta doin a lift on my truck

I'm gonna find another fornt axel for it its got some issues it needs gears and its not worth figing the axel shaft on the driver side is bent I'm jus gonna find another one anyone no were i can find one? or does anyone have one while i got the front end apart

did it make it any louder? and if so how much i might do that wwhile i got it in the air still doin the lift. right after the glass pack it dumps right befor the rear wheel

this lift is temperey till i get money for a spring over right now I'm takin a brake i got the fornt springs out you guys are a big help

I'm only gonna use them until spring until i get money

thanks for the help I'm gonna start tommarow morning with my day off of work

did you have any problems getting back in

Hi i was gonna do my lift tonight but i have a couple questions about doing the front coils in my directions do i have to do get a strut compressor? to put the new coils on? I'm doing a 3in lift on it i was just woundering. is there any tricks on doing it any help will help alot thanks

i got a glasspack here's a pic of it its old but it sounds good not loud enuf for me but you can hear it coming

Get some of these... Hell Creek Springs. I used them with my 3.5" Rubicon Express kit and they are great. The guy making and selling them is a member on here too. His username is "Hellcreek". Hi I'm gonna do them soon as i sell my boat i dot have the money but i did get some front coil springs 3in lift and went to autozone and picked up some shacklels for the back 20 bucks until i get money for them hells creek leafs

my buddy has them and he loves them

here's a pic of the front

really I'm screwed for the next couple days then lol i got all the stuff in today and was gonna put t on 2night but i got 3in lift coils for the front and i was gona do the block i the back but now i can't. THANKS FOR THE INFO Pete I'm glad i didnt get into it and find out i was gonna lower it lol

take a pics of just the axel I'm doin a lift here real soon soon as my 3in sprngs for the front and the block i already got for the rear

Hi I'm not sure what one lol but how much would run ?

:needpics: ya for the pics i diddnt have a camera and my phone was at home on the charger

its the axel shaft I'm pretty sure the guy befor me had it out and thats what he toldme it needed. and also for the other stuff you said explin it a little bit I'm not sure what that is

Ok so today i looked like an idiot i was at a kroger parking lot waiting for my mom to get done shoppin and i decided to flex a little bit. and there was ice and snow it was a snow bank about 2ft tall and there was a curb and a parking block thing. and i backed up the bank and the rearend sunk down in between the curb and the parking block and i go to pull forward and spun. and i new my 4wheel drive didnt work it needs a new axel shaft i think? i was diggen around the rear wheels with a shovel and after 20 mins of tryin to get out. and a guy in a xj with a 3in lift pulled on the curb and pushed me out and there was like 10 people standin around watchin! so i need to get my 4 wheel drive workin. but anyway i was wounderin if anyone had a axel shaft? they would sell me

what size lift is on it now?

I have 31/10.5/15 on my stock comanche i got alot of rub but its only when i turn sharp as it will go here's a pic of it with the 31 bfg all terain i wouldrecomend a 3in lift tho like I'm doin next weekend

yup it is the one in algonac he wanted to trade me for my blazer so i did i always wanted a comanche . i put the wheels and than some new shocks on it and thats it but i got the day off of work today so I'm gonna go out on it

for my floor it has a hole in the drivers side and passenger side and I'm gonna use fiberglass and resin until i get a welder and floor pans what do you think? is fiber glass a good idea? any body have any suggestions