dakal Posted May 18, 2008 Share Posted May 18, 2008 Image Not Found the person who installed these did did the easy way. notice it hanging below the frame. notice the otherside has no bolts. should of had bolt in each corner. [/img]Image Not FoundImage Not FoundImage Not Found here you see the only two bolts. these are self tappers Image Not Found i have drilled out the holes. the left bottom hole is just the hole. the right bottom hole is with the jack insert installed. the top right is with it tapped [/img]Image Not Found picture off the inserts, tap bolts etc. Image Not Found finished. it took eight hours. four bolts per bracket, four brackets. i had to use four different drill sizes. it is above the bottom of the frame now, where it should be. the two holes are were it was mounted before. so the first time i brush a rock it won't fall off. pic out of place :headpop: :D Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now