87ComancheLB Posted March 23, 2008 Share Posted March 23, 2008 Hello all, My tan carpet from JC whitney is gone faded looks like it rotted but still may just need some cleaning, but I'm thinking about going back to the stock thick black vinyl it came with originally. I found some on JC whitney just wondering if it the same quality, durability anyone order these? Anyways getting tired of dealing with carpet this will be the 3rd time in 21 yrs. Also looking for some good tan xj 2dr bucket seats. Driver side broken frame support to back saw the mod post looks good may need to hit the local salvage yard luckily have few pick your part and see if anything is available. $152.98 delivered not bad, free shipping savenow promo unless someone knows any place cheaper? Well I just placed an order. http://www.jcwhitney.com/autoparts/Product/tf-VehicleBrowse/s-10101/Pr-p_Product.CATENTRY_ID:2007281/p-2007281/N-111+1987+200004015+600006840/c-10108 Link to comment Share on other sites More sharing options...
CWLONGSHOT Posted March 23, 2008 Share Posted March 23, 2008 I am very close to doing this as well!! Now I'll wait and see what you have to say!! Thanks!! Please post up what you think of yours once you get it and check it out!! CW Link to comment Share on other sites More sharing options...
DansGreyMj Posted March 23, 2008 Share Posted March 23, 2008 Mine came with the rubber floor from the factory and its ripped in a few places, so hopefully that is good quality. Link to comment Share on other sites More sharing options...
87ComancheLB Posted March 23, 2008 Author Share Posted March 23, 2008 Ok will do, I kind of regretted ripping it out in the 1st place, seem very rugged never quite gave it a chance before replacing it with carpet and seem like the inside will be easier to keep clean. I will use also some very good quality rubber mats to protect it. Link to comment Share on other sites More sharing options...
joshmillslane Posted March 23, 2008 Share Posted March 23, 2008 I did it in mine, but not the JC Whitney one. It looks nice and very tough, but it was a PITA - definately a 2 person job. This stuff is heavy and stiff. It takes a lot of yanking and wrestling to get it in place. Link to comment Share on other sites More sharing options...
johngus Posted March 24, 2008 Share Posted March 24, 2008 I've replaced mine with the JC Whitney one. Good quality vinyl and padding, its easy to clean up too. I did it about a year ago and its held up well. It wasn't hard to install either. Link to comment Share on other sites More sharing options...
87ComancheLB Posted March 24, 2008 Author Share Posted March 24, 2008 Good to hear Thanks! Well I removed the carpet and well still looked as good as new. I'm going to go ahead and also seal the driver and passenger floor boards with thick rubbery undercoating for added protection before laying the vinyl. I will also need the rubber boot to the tranny I can see daylight! anyone know where to order one on line? Link to comment Share on other sites More sharing options...
jtdesigns Posted March 24, 2008 Share Posted March 24, 2008 That is one CLEAN floor pan... dibs f you ever sell it.. :brows: Link to comment Share on other sites More sharing options...
87ComancheLB Posted March 24, 2008 Author Share Posted March 24, 2008 You know after seeing that post on that 1988 Comanche on Ebay, I saw it today somewhere in one of these forums it had a front snow plow and only 12000 original miles! 31 bids and sold for almost $8K, :eek: not saying I'm going to see those kind of prices, who knows maybe I will see more? but I may need to test the waters if you know what I mean. After all money talks and anything for sale even memories. Link to comment Share on other sites More sharing options...
comanche87 Posted March 25, 2008 Share Posted March 25, 2008 i am using hurculiner for my floor coating. ive already have the front section done now i gotta do the back section. its looks good and its easy to clean. Link to comment Share on other sites More sharing options...
Wildman Posted March 25, 2008 Share Posted March 25, 2008 You know after seeing that post on that 1988 Comanche on Ebay, I saw it today somewhere in one of these forums it had a front snow plow and only 12000 original miles! 31 bids and sold for almost $8K, :eek: not saying I'm going to see those kind of prices, who knows maybe I will see more? but I may need to test the waters if you know what I mean. After all money talks and anything for sale even memories. This is the same MJ that the same guy re-listed, sold about a month ago, and he didn't get the same $$ he did the fist time, and all he need to do was get it running with a new alternator (That cost him $3800 :teehee: ) http://cgi.ebay.com/ebaymotors/ws/eBayI ... 76835&rd=1 Link to comment Share on other sites More sharing options...
87ComancheLB Posted March 25, 2008 Author Share Posted March 25, 2008 LOL Well sounded too good also, Well I just happen to have this spare can, but you know your right, might as well go the extra mile. Link to comment Share on other sites More sharing options...
87ComancheLB Posted March 26, 2008 Author Share Posted March 26, 2008 I went down to the local Kragen store, 1st I just picked up a quart of herculiner $29.95 I figured a quart should be good enough for the cab?and then I saw they had the 1 gallon one for only $89.95-$20 rebate so for $69.95 enough to do a 6ft bed, still a lot better deal oh well planning on doing the nerf bars in herculiner also. I'm just about finished with the prep work. Better rebate deal here $25. That's were my receipt is going. http://www.herculiner.com/specialoffer.html Link to comment Share on other sites More sharing options...
87ComancheLB Posted March 28, 2008 Author Share Posted March 28, 2008 Waiting for the 1st coat to dry, some pic's of the progress. Vinyl covering been ship on the way. My beautiful cab. What have I done! scouring pad sucked ended up using 60 Sandpaper. Link to comment Share on other sites More sharing options...
watchamakalit Posted March 29, 2008 Share Posted March 29, 2008 Looks good man. I would kill to have my floors look as good as yours do. :cheers: Link to comment Share on other sites More sharing options...
87ComancheLB Posted March 29, 2008 Author Share Posted March 29, 2008 Thanks Man, I guess being the only owner has it advantages and good weather, well did the second coat looks good letting dry overnight. 8) Link to comment Share on other sites More sharing options...
watchamakalit Posted March 29, 2008 Share Posted March 29, 2008 So for those of you that have done this swap is there a noticable difference in the accoustics of the cab? Is it alot louder with the vinyl or about the same? Link to comment Share on other sites More sharing options...
87ComancheLB Posted April 1, 2008 Author Share Posted April 1, 2008 Before After Link to comment Share on other sites More sharing options...
87ComancheLB Posted April 2, 2008 Author Share Posted April 2, 2008 Well the Vinyl has arrived and man is it heavy duty, this thing is nothing like the stock it must be around 2.5-3 millimeters thick it is pretty difficult to work with but it's not bad. Best to lay it out like how it will be installed. I used the string method to determine where to cut for the shifter from back and sides. Nice thing is it has indentations for exact fit, center of front seat bolt, safety harness and certain body shapes. Some insulation but only for the hump. I left it out for this trial fit. Looks like maybe some trimming is needed also. Almost the same texture as the herculiner it's like double herculiner. This may be last time I have to change the flooring it looks that durable. Too bad I'm waiting for my new shifter boot to arrive, but it will be ready. Link to comment Share on other sites More sharing options...
jtdesigns Posted April 2, 2008 Share Posted April 2, 2008 I can't wait till that shifter boot comes in too... I'm anxious to see if it is the same boot.. :D Link to comment Share on other sites More sharing options...
Motion Offroad Posted April 2, 2008 Share Posted April 2, 2008 We've been using the ACC product for awhile and it's AWSOME! The MJ vinyl comes in a few more colors as well if anyone is interested. Black Gray Beige Blue Desert Camo Woods Camo Red We do sell it and can probably beat JCW's price if anyone is interested. Link to comment Share on other sites More sharing options...
CWLONGSHOT Posted April 2, 2008 Share Posted April 2, 2008 We've been using the ACC product for awhile and it's AWSOME! The MJ vinyl comes in a few more colors as well if anyone is interested. Black Gray Beige Blue Desert Camo Woods Camo Red We do sell it and can probably beat JCW's price if anyone is interested. I'll be calling you soon!! I prefer to buy from Jeepers!!! CW Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now