Jump to content

Dead battery, weird clicking noise after attempting to jump it


Recommended Posts

Hey guys,

 

So my Comanche (1989 - 4.0 - Automatic - 2WD - Short Bed) sat for about 2 weeks after I took it out for a mil training event.

Just for some background info: before I left for the trip, I replaced the starter and wired in a new turn signal bulb connector since the original was semi-melted and didn't work consistently.

 

Now, when I went to start it, the battery was dead. I have a HALO power bank that can jump car batteries, so I attempted that to see if it'd get it going, but it'd turn over and then die after like 3 seconds. I'm going to trickle charge the battery and see if it'll turn over later, but my main concern was that it was making a clicking noise for a couple minutes after trying.

It clicked while completely off with the key removed. Couldn't really tell where it was coming from. I took a couple videos trying to move my camera around and see if it got louder, but it didn't really help much. I am assuming this is related to what killed the battery, since it was doing it while completely shut off.

 

Any ideas?

 

P.S. sorry about the sniffling in the videos lol

Link to comment
Share on other sites

5 minutes ago, Lantresor said:

Replaced the battery, it started right up. Shut it down, unplugged and removed battery, click still happening. I'm at a loss :confused:

Are you saying you completely disconnected and removed the battery from the truck and it is still clicking like in the videos?

Link to comment
Share on other sites

6 minutes ago, Ωhm said:

Thinking maybe metal and heat related. 2¢

Could it have gotten hot enough to make noise running only for 3ish seconds? Not being a smart-@$$, I'm an idiot and legitimately don't know. Each time it's been a total cold start and only ran for long enough to turn over

Link to comment
Share on other sites

To me, the clicking sounds like a relay or solenoid cycling.

If the battery is completely removed, no way a relay/solenoid could be clicking.

It would have to be metal expanding/contracting from heat, as ohm said.

Do you have an aftermarket stereo?  Maybe a big capacitor to run a subwoofer?

 

If it does the clicking again, try grabbing and holding the various relays and starter solenoid on the pass inner fender.  That click is loud enough, I think you will know if you are touching the relay when it happens.

 

 

Link to comment
Share on other sites

5 minutes ago, schardein said:

Do you have an aftermarket stereo?  Maybe a big capacitor to run a subwoofer?

Yeah I have a cheapo aftermarket stereo that was already installed when I bought the truck, no sub or amp or anything extra. Thanks a bunch, I'll test out holding the relays and solenoid in the morning and make an update

Link to comment
Share on other sites

15 hours ago, schardein said:

If it does the clicking again, try grabbing and holding the various relays and starter solenoid on the pass inner fender.  That click is loud enough, I think you will know if you are touching the relay when it happens.

Nothing from the relays or solenoid. Still clicking, but doesn't do it when battery is hooked up until after I start it, maybe it is just heat related, I can't think of anything else.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...