1986 Long Bed Rear Bumper

[DadsJeep]

Hey all. I tried searching but no luck. Trying to help my dad find a new rear bumper for his 86 Long Bed. All the listings for the common FEY WESTIN 63000 show it's for a 87 and newer.  Is this true? Anyone have a 63000 they can measure for us? He bought what he thought was the correct bumper off ebay, but it's much too long. 

 

Any help is appreciated. I'm not located near the truck, but dad can measure, send pictures etc. I've included all pictures we have at this point. 

 

Measurements

Stock rear bumper 64.75" long

 

eBay replacement 73 1/2 long

7 3/4 inches wide

7 3/4 inches tall

mounts 36 3/8 inches wide outside

 

ON THE JEEP:

45 inches wide

[fiatslug87]

Is your 64.75” measurement including the plastic end pieces? My stock one is 68” including them and 45” for the mounts. From what I remember there are special mounting brackets required for the Fey/Westin bumpers to bolt to the rear bumper mounts.

[eaglescout526]

17 minutes ago, fiatslug87 said:

Fey/Westin bumpers to bolt to the rear bumper mounts.

Before I found a factory bumper, mine was bolted to the original bumper brackets just fine actually. 

[DadsJeep]

46 minutes ago, fiatslug87 said:

Is your 64.75” measurement including the plastic end pieces? My stock one is 68” including them and 45” for the mounts. From what I remember there are special mounting brackets required for the Fey/Westin bumpers to bolt to the rear bumper mounts.

He just went and remeasured. 68" overall width with the rubber ends. 

 

 

[fiatslug87]

So it sounds like maybe it’s not a 63000???

[DadsJeep]

15 hours ago, fiatslug87 said:

So it sounds like maybe it’s not a 63000???

That's what I think. Does anyone have a real Fey/westin 63000 they can measure?

[coheed]

 Mine is just 64" at the widest and about 45" from mount to mount. So I think you were sent the wrong one.