Drivers side floor pan

[Top C]

I need to replace the floor pan on drivers side of 87 MJ. I need to know a good quality place to purchase a replacement? I google it and I came up C2C is a good quality pan? Also I want to seal the joints what is the best sealant  for this job?

Thanks

Mike

[Spinnakerblue89]

I have one from C2C. 

A couple years ago it was pretty obvious by comparing C2C to Key parts panels that the KP fit better, and likely was superior. I was settled in KP until I noticed that the one sold on C2C looks very similar. It was a little cheaper too, so I bought it and it seems okay to me. 

 

For sealer, I bought two tubes of a seam sealer at O Reilly's. I forget the brand name, I believe it started with 'U' and it came packaged in a violet tube. There's other brands to try also. 

 

[Top C]

Okay thank you for the info.

[ghetdjc320]

Key parts is the one to get still. C2c copied the key parts XJ floor pan which is what we all had to use previously but now they have the MJ specific pan. Brushable seam sealer is what the factory used around the floor pan joints. 

[Top C]

Key parts do you have a link for them?

 

[Spinnakerblue89]

6 hours ago, Top C said:

Key parts do you have a link for them?

 

First you need to determine if you need a full floor pan or just a half. I only needed a half myself a few patches. I have a few Key Parts pieces for other areas and I've always bought them on eBay. 

 

Would you care to provide pictures of your truck's floor?  

[eaglescout526]

A good dryer or washer will do good for repair panels if your in a financial pinch.