Inner shifter boot source

[Drahcir495]

I am looking for the inner shifter boot for my AX15 - this

 

Does anyone have a part number for this or where to look for one? Nothing online looks like what I need? My next question will be following up on how to get in on?

 

[fiatslug87]

This one works Quadratec link the original is no longer made.

 

You have to remove the shifter at the “bulge” section you can use a pickle fork to pry it up.

[TurboedMJ]

I just bought this for mine, it seals quite nicely on the trans tunnel. 

https://www.ebay.com/itm/362801854054?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=PkvmElRHQVK&sssrc=4429486&ssuid=52xfll3ythu&var=&widget_ver=artemis&media=COPY

To get it off, I just pulled the shift boot up past the bulge since it was already tore up. To get it on I think mine didn't go past the bulged section. 

[Htchevyii]

I used a TJ one. I had to drill new mounting holes. https://www.amazon.com/One-New-Shift-Boot-52078970AC/dp/B01BX3GGBO/ref=mp_s_a_1_1?dib=eyJ2IjoiMSJ9.uMP4Plx4eFsYCnepFqKhNm_-zbZh9jTsXup97R9DDZaF8SQO-PqD1CBt-WG1nAl15lSLggX47zRNTGhSX3ZW3V0FOppmI1cBx-oEW0mcCIrLzUiePrb0M_q3zOdy-3xq5mfl6KidBC7iGTIzmMR6-HInbUqvESPdLu7Gx1cwtcfE3Xv22eXtHiQ0pORCNtVJ3xpfpGLkQuJ4J4OlbFI4ng._CiYQX7kCJkABLzR-2lVuQvsZC6dDYW9x5ZCmG0byrg&dib_tag=se&keywords=52078970AC&qid=1714103417&sr=8-1

 

[ghetdjc320]

All the links above are for the same product. The tj boot works well. My trans cover isn’t standard but here is how it looks on mine. I used some black rtv for additional sealing along with stainless metal roofing screws that come with the captured sealing washers.

 

[Drahcir495]

Thank you all