Jump to content

novanut1964 1987 comanche project


Recommended Posts

here's a couple pics, after hauling my comanche home in literally pieces. rolling rebuilt 2.5 engine into shed to store out of the weather till installation, the rebuilt ax5 and the rebuilt np231j transfer case in the trunk of my 2005 civic hybrid. i rolled the engine on 4" abs plastic pipe and plywood into the shed, always doing stuff by myself

2E0AB3DB-344D-402A-A4E5-2F58EB22F409.png

8CD94CF1-5A94-4B9E-8037-D17F48E0D3CB.png

Link to comment
Share on other sites

i changed the crank position bolts to the correct shoulder bolt this morning, i am going to drive and get propane, about a 29 mile test drive. i put the lower dash back together after i changed the ignition switch on the column. the valve cover gasket i will change, it broke checking lifter noise on new rebuilt engine. i bought elgin lifters and pushrods in case i need them. less than 350 miles on new engine, i changed the breakin oil already. 6/29/21

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...