Jump to content

Recommended Posts

I'm on the hunt for a set of bucket seats and center console to replace the bench in my Comanche. Who's got some tips and tricks for me? I prefer just ordering them online and not getting something out of an old Cherokee.

Link to post
Share on other sites

don't bother with an old Cherokee, go to the junkyard and pick out any bucket seat from a newer car that your butt likes. :D  they are all about the same level of difficulty to install.  usually a bit of 1x1 tube steel can do it. 

Link to post
Share on other sites

Pete is right dude, there are some super comfy Beemer seats out there you could score, but sometimes these can be pricey. Sit on a few and find your set, then fabricate you some mounts, it's worth the time and effort, trust us...

Link to post
Share on other sites

If your looking for aftermarket, I enjoyed the corbeau Baja XRS in my YJ. PRP seats are also highly regarded. For an MJ I might go with a corbeau trailcat or similar since the width is nice and thigh bolsters are easier to get in and out of. 

Link to post
Share on other sites

Got my Dakota 40-20-40 seats from a local junkyard.  No wear and in near perfect condition.  They were from a late 90s-early 2000s Dodge Dakota.  i found a set with the high headrest.   Had them in since 2018 and I love them.  Had to modify mounting brackets, of course.  Best upgrade EVER.

seats.jpg.b613f0b92c7f789aea45233505f308f3.jpg

Link to post
Share on other sites

I installed Corbeau reclining "Sport Seats" in black cloth, and I sprang for the lumbar support option.  These seats are VERY nice, with good firm cushions and some side support.

 

They ran me about $750 for the pair.   Not cheap, but well worth it compared to some worn out junkyard stuff with cigarette burns and coffee stains.

Link to post
Share on other sites
4 hours ago, AZJeff said:

I installed Corbeau reclining "Sport Seats" in black cloth, and I sprang for the lumbar support option.  These seats are VERY nice, with good firm cushions and some side support.

 

They ran me about $750 for the pair.   Not cheap, but well worth it compared to some worn out junkyard stuff with cigarette burns and coffee stains.

:thanks:

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...