Jump to content

Recommended Posts

Several months ago I decided to replace my A/C evaporator. I had a slow leak and It's 31 years old. So, I pulled the dash and replace the evaporator and the heater core, also 31 years old, and put it all back together. I had a new blower motor that I bought years ago so I replaced that while I was there. Everything was fine until a few weeks ago, with the warmer weather moving in, I took the truck to the local garage to get it evacuated and refilled with Freon. They serviced it but notice very little flow from the blower. 

I have been trying to figure out the reason :confused: since then. Finally, I pulled the blower and it ran fine with 12V so I decided to put the old blower back in and wal-la :doh:. The new blower must be wired backwards from the factory.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...