Jump to content

ISO 84-86 AX5 clutch parts


Recommended Posts

Recently I learned that I don't need to change the bell house to swap from an internal to external slave set up for the AX5. 

So I am in search of all the pieces related to the external clutch. I am not to sure if the newer stuff will work, I am just goin off of what the catalog showed me for the bell house I have. 

 

3F523A49-A500-413A-ABFC-1745F205FD10.jpeg.e5dd01df66ae58d19ab8d621927dbb1e.jpeg

 

25, 22, 24, 18, 19 are the pieces I am in search of. 

 

here's the coveted Clutch throwout lever:

b54458ds-1920.jpg

Link to post
Share on other sites
  • 6 months later...

Yeah I have. The later style uses a different set up that requires me to change the bell. The 84-86 external set up just has me drop the trans, swap the input shaft cover and put in the external set up with the bell house and done. I already have the external slave and trans cross over pipe. 

Link to post
Share on other sites

I just figured out this is for project "Chunk" isn't it? I haven't been on here keeping up with builds much this past summer. If it is it makes much more sense why go through the effort here and pretty cool either way. I'm sure there hasn't been barely a soul to do this.

Link to post
Share on other sites

Chunk I believe has the set up already actually. But I didn’t get a good look as I was laying in soaking wet grass looking for rust holes lol. I couldn’t even get any info off the diff tag to see what ratio it is. But the idea was for little red as I am getting fed up with the internal system. 

Link to post
Share on other sites
  • 3 months later...
  • 4 weeks later...
×
×
  • Create New...