Jump to content

Recommended Posts

Just a quick shout out to all you Comanche Club contributors for the tons of help you've unknowingly given me over the years.  Comancheclub has been my goto for the many, many projects my Heep has given me over the years.  Even though I just registered as a user of the site, I've been using it for years.  A short list of the projects I've completed, most of which with the help from ya'll:

 

  1. Instrument gauge cluster swap.  I found a Grand Wagoneer cluster on Ebay for like $60, which looked to be a hella good deal.  I spiced it up with some blue LED lights, and was finally able to get it working right after I found the adjustment for the tachometer.  The OEM gauges were stupid with a huge gas gauge and only idiot lights for the battery, coolant temp, etc.
  2. Gear shifting knob replaced with an 8 ball.  Not as easy as it sounds...
  3. Custom steering wheel.  A few challenges, but I was able to get the center Jeep logo moved over from the factory wheel.
  4. Renix Rem II monitoring tool added.  Thanks Nick!  Looks cool and with the custom color feature I was able to match my gauge cluster blue led's
  5. New rear leaf springs
  6. New rims and tires
  7. New shocks all around.
  8. Some huge steer horns added to the front hood.  And that ain't no BS!
  9. Re-manufactured long block.  That one hurt. 
  10. Grounding an electrical connector fixes galore.
  11. Sensor troubleshooting and replacement.
  12. New water pump.
  13. New alternator.
  14. New clutch.  I farmed that one out as well I guess.
  15. New transfer case.  Also a wee bit painful.
  16. New radio head unit, speakers, and subwoofer with amp.
  17. New muffler.
  18. New windshield that doesn't leak.

Again, just wanted to say thanks for all of the help.  It's made what could have been a painful journey both fun and educational.

20190925_094006.jpg

20191106_113902.jpg

Share this post


Link to post
Share on other sites

you are most welcome :L:  it's what we're here for. 

 

now where's that build thread!  :D

Share this post


Link to post
Share on other sites

8 ball shifter knob......I used a cue ball for mine.  You are correct, it's no easy task trying to drill a pool ball:yeahthat:

Share this post


Link to post
Share on other sites

Never had a problem drilling lucky 13 

drill out to size use a thread chaser held still using 

1D2DC756-A981-48AA-83DA-B9797119F43F.png

Share this post


Link to post
Share on other sites

Great place - right. It’s nice of you to thank the Comanche Club. Glad you finally officially joined. :L:

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...