Jump to content

Recommended Posts

I haven't had a build thread for a few years so I guess its time to start a new one. New on the forum but by no means new to the Jeep community. My most recent builds:

 

Project Poughkeepsie (SOLD) - https://www.jeepforum.com/forum/f177/project-poughkeepsie-2001-anniversary-edition-build-thread-3527642/

 

IMG_1509.JPG.d9ad2ac52c2c742dfc4393fad5aee1cd.JPG

 

Project Daily Driver (290k miles and still kicking) - https://www.jeepforum.com/forum/f177/another-daily-driver-xj-build-98-classic-1375527/

 

IMG_2408.JPG.d143f270749f60797020b721ac6443a7.JPG

 

I've been overseas for the last year and have been planning a Comanche build. First things first, I needed somewhere to work on Jeeps. I lucked into a house with a huge 30x40 shop!

 

58769343137__8F035B66-42EA-4E53-85C9-5BE5A4426E0D.JPG.679b8cf7713676aa7ac8e2000bb6dd20.JPG

 

Next I found a low milage (140k) SWB Comanche with a rust-free body and a dent-free bed (it had a bedliner in it!). I love buying Jeeps in the south... no rust! Dragging it home:

 

jjfDcL6pTOKslj+i1Mddfg.jpg.303229fa69872dcf31ca4c0609ee23cb.jpg

 

s8SxKDvNSMSWbrGUCLVr5g.jpg.d770ab12b2ca2f6790c9952e593f9897.jpg

 

Into the garage:

 

IEwcgrzkRKW6F1Nx3Kn7Fg.jpg.18007f01cfa43b47b65d91da625fd305.jpg

 

I also found a totaled '99 XJ as a donor for parts. It looks pretty rough but only has 123k miles! AW4/NP231/4.0L ect. 

 

58821568184__CF888DC2-D116-47ED-9E9D-488CBEB31BBC.JPG.2b55bf1d4f9917b973579c99ed7937a9.JPG

 

58821569874__EB51B457-24D9-4DAF-AD0D-A79CF281F6B3.JPG.a4c2e315a3e1a15236bb72201b5b2e10.JPG

 

Stripping the MJ down:

 

58829945878__0970A710-759A-4A9B-A8C3-44E0E814159B.JPG.b8ff025390cd038eb99991b34cb97e91.JPG

 

97+ mock up:

 

yQAixfK2RCuwWm0C4OXTlA.jpg.1040e5913416bacb72e88132612e7398.jpg

 

Brought the XJ down to TX from CO. All of the vehicles in one place for once:

 

A5ldzTeSS0mESLN3aQeO4A.jpg.80ebe6a4475dcfc52b9309b3d89448ff.jpg

 

More to follow!

Link to post
Share on other sites

The tear-down continues:

 

C324C37E-6340-4193-99A7-DECBBD039EBE.jpg.715b527d5b585f898197963116e5da15.jpg

 

omd3rH6xT6+Zr4yHoTsN6g.jpg.96b9dcc60599c21866ac382138b9468b.jpg

 

ZdhYNbucRde5wg2BvpSqKQ.jpg.a41266ed1ec99d745e98b56628b9d534.jpg

 

wdIYUDyITTqaA0Z%25xhqZkw.jpg.f435a6fe9af7b0730368083d9c8f5742.jpg

 

After the drivetrain was stripped, I pressure-washed everything yet again. Following that I stripped the suspension and axles:

 

59269838932__CA9633A4-966C-4FA1-8F9E-FD32671B4FCE.JPG.bd7818e5def2219453bfffff7598fe87.JPG

 

Before I could weld in some T&M Metal Fabrication stiffeners, I had to repair the one spot of uni-frame damage at the driver side bumper mount. I cut a section out of the donor XJ and welded into the MJ. Knowing that the stiffeners were going in over the repair, I just did a quick butt-joint instead of overlapping or doing something stronger. With the stiffeners the repair will be way stronger than it was from the factory.

 

COU6YBGFQjeKrkwWS4M7%25Q.jpg.0d7d9d24ed872dea00636a88c1fca16d.jpg

 

59277036420__F34E28BE-BF5B-41A0-83C8-B04CF0647B4D.JPG.0e5e7d501c645a1a87a7c59ab7e52c97.JPG

 

324673330_cuIRkYkNSDWPOb7sJLNgg.jpg.eb4c8fdd78ec4353a83cbcd15bd81c3e.jpg

 

B3DcQlsqSYaPBHkM3VZ9aA.jpg.471ac2c03f5dcacbbde0be314b2619ad.jpg

 

150306023_e0WR43HTpOt4A2Et8lLkg.jpg.b7d695d0c830f371a95c2f9a141ad7b3.jpg

 

1087614947_azxkoeKS2qvbg6ldz7V6Q.jpg.e22f7c986670cbccfb0abb2bece63685.jpg

 

WAwkTOZaT+mPro+Son3Ecw.jpg.ba379a4946baf53b902d0e6295bf48ef.jpg

 

Starting to burn the stiffeners in:

 

JvXtJBOUS9ObtGJvsRBQSg.jpg.b9faa0e25cf02ef809db1a411adc5f28.jpg

 

 

Link to post
Share on other sites

AQyF9qTZRJq1RaUZeztslw.jpg.e400d3a04dbd7e650b724d492e5572f7.jpg

 

I plug welded all of the holes then did a 2" stitch around the edges. No instructions with these stiffeners but I think this is probably the strongest option. 

 

o3e0mZRYQEi%25G%25azcYVCWg.jpg.376e5779d366941c4ca4bd25bc9997fd.jpg

 

443921245_Qc63obASYGjYs4dvKQyuQ.jpg.139b122552a3cd016e137dfde3bb1361.jpg

 

I seam sealed around the outside to help keep moisture out. 

 

v4XwoELhTpGb9lzAxDDGHw.jpg.51ff6003b41c821ac25858ddf500bcfa.jpg

 

Lastly I sprayed everything down with self etching primer to keep the rust away until I can get everything painted.

 

ZF4kUZBjSm6EdW8iX43sJg.jpg.17cb2c0b3f010a8eb1446d6ffb346de3.jpg

 

Then I took a break from the welding to clean the garage. Its been a mess since I moved in and it was nice to finally have room for activities! 

 

1jeL8rAwRuSi8u29z%25Y2lQ.jpg.c85abd7990bf1e32c76d4b7ceb84431b.jpg

 

New tool box. Craftsman stopped selling the drawer foam that you can cut tool shapes into so I transferred everything over from my old box.

 

BOGtg5tCQIi2WVVNRh7Kcw.jpg.cdb9edbdf6601a86f254b490299324f4.jpg

 

I found all of my quadratec magnets... I've made a purchase or two over the years...

 

QWjRdixmTFu+Ldr+%25n1dVg.jpg.1417e3b6eb249f80584ece0ca68cf6d1.jpg

Link to post
Share on other sites
  • 1 year later...
On 11/13/2019 at 10:39 PM, Pete M said:

send me a PM with a name/address and I'll send yours out. :L: 

 

PM sent! Thank you!

 

I guess it's finally time to update this thread... its been over a year. Unfortunately the MJ took a back seat while I spent a few months in Europe for work... twice. Covid killed most of the usual fun but I did manage to make a friend somewhere over Spain :laugh:!

 

4482A9F6-5940-4765-BFB5-5945B6BC8A52_1_105_c.jpeg.4c3979a27f6a29633a7eaf0dd8717933.jpeg

 

Sometime during the spring I added yet another Jeep to the fleet. I guess I'm a sucker for half truck half Jeeps. I also sold the orange XJ and the Ram. I'm down to a Gladiator, a SRT WK, and the MJ... for now:

 

1C62D479-AA77-45E5-BE7E-D1FF84D4965C_1_105_c.jpeg.c10c43890aa42cbef32b1cbbc9ccda6c.jpeg

 

I took a break from the MJ to build a quick WK for my parents. 2" OME w/ 32" KO2's and some Gladiator Sport wheels:

 

FF2FB806-35D1-4AB8-9D93-79586E65EBEA_1_105_c.jpeg.eda3acf3eb4ba0d6eab1dfe554f48d93.jpeg

 

Ok fine, enough excuses, back to the Comanche content... I'll rewind to where I last left off. After fixing the drivers side frame rail and adding stiffeners, I moved on to stripping down the '99: 

 

FF621982-C0F9-4403-A0D0-222343BF35EA_1_105_c.jpeg.f3d4926f924cb64f3a6e49bcb6916918.jpeg

 

FCB43165-86A7-4073-8D18-6D4ED9639E4A_1_105_c.jpeg.5ac8dbf50811977249dcb9401d4da72f.jpeg

 

15041642-B94F-4069-962A-76D3A7EA1C7E_1_105_c.jpeg.02397a96c2da85d4a6ac6f9e837e21d0.jpeg

 

XJ door strikers welded in with the correct backing plate behind and retained just like the factory XJ so its fully adjustable:

 

1520CB40-2F8B-4AF5-BF7B-ADF12B206532_1_105_c.jpeg.fbd9fa6388fe09dddc4f5c4794368cd3.jpeg

 

Firewall mods:

 

6658E925-1992-4B63-89E0-8B998DA6BD9D_1_105_c.jpeg.d0572758c5d94b66c5fe459f783dc02d.jpeg

 

002ACBDA-9580-45FA-91AB-299182A6774B_1_105_c.jpeg.b79479d520ceff2c4e69639297710e93.jpeg

 

C141F4CE-46A5-4F31-89EB-368C372FB30A_1_105_c.jpeg.f9282da66e4639d2b8b4f15c0b50d14f.jpeg

 

Notch Flares being test fitted with some 37's. I plan to run 37's but not this setup:

 

8A954FC6-AD07-44FB-A1AC-99C402D354F8_1_105_c.jpeg.3be360baecb48e3adb03d9796952f130.jpeg

 

CF3B6A98-7C4B-4D26-9ACA-A42F59B4B168_1_105_c.jpeg.28c4e8b226a79e6aa21b46ec08d9cf21.jpeg

 

What a pain to install... But they're the best looking flare IMO:

 

9346332C-F34E-4F89-8A58-EEACE69C91D7_1_105_c.jpeg.5010592c50175160c2cb51966cdf91f6.jpeg

 

Bondo to form a perfect edge:

 

A97A7398-3F10-4968-8641-FB9E0C21C059_1_105_c.jpeg.3b1aef74b235955a906c7883a199f195.jpeg

 

5.9L ZJ hood vents complete with factory drip trays:

 

7BE31D6B-C3E0-441B-80F6-1D85D01DFAAA_1_105_c.jpeg.365fe24b0a4cb1b3565127af1df369ec.jpeg

 

DC265241-A7F4-45B5-94AE-C8C98246A911_1_105_c.jpeg.8249c374157f2585098a385f657d9a11.jpeg

 

419F0DDD-C38C-4DAD-8925-87D74F96977F_1_105_c.jpeg.27321af65ea29481506ee04ae85db8d0.jpeg

 

Then it was time to start sanding... I wish I had taken it completely down to metal but thats a story for the next update... We'll see how motivated I am tonight.

 

91937BFE-E4B9-4565-A103-199708D41AE1_1_105_c.jpeg.0604da78b0605fe8797c3fa1db00eb51.jpeg

 

Well thats about when things went... a little off reservation. I had planned a nice moderate build like my previous blue XJ (Project Poughkeepsie) but after helping a friend stuff a LS1 into his C10 pickup and hearing him go on and on about how easy it was to do... My moderate build went off the deep end:

 

81D6DF7A-D1C3-4ED8-9D58-C2BF2065EE2E_1_105_c.jpeg.23623844243da8016493cb28c12ffed8.jpeg

 

 

Link to post
Share on other sites

It turns out PSC is literally down the road from my house... so stopped through their amazing facility to grab a big bore XJ/MJ box:

 

81BB4BE4-92F5-44C0-8110-006919593E14_1_105_c.jpeg.6ff9bdd85ea0e36908dd3567eeca2ebe.jpeg

 

I then plated the x-member with some 3/16" steel:

 

130B70D7-6766-442A-9245-CA2DB066296E_1_105_c.jpeg.ab37ed9fdfee114a77056ec5254e7420.jpeg

 

Complete with some 1/2" bolts and tabs welded onto the inner frame rail stiffeners:

 

E0B1CB4B-6381-47F0-8329-CEC37D44DE8B_1_105_c.jpeg.30f3f9d7a28760740b6098378192d65e.jpeg

 

Just enough room between the PSC box and the opposite frame rail for a winch! 

 

26F477EF-DADE-42DE-B952-DDC397681F22_1_105_c.jpeg.4fe031e09dc7c770082e8c781aa45462.jpeg

 

Unfortunately Warn was slow with drop shipping me the winch so I moved onto the next project. I decided to do a mesh grill along with a HD front facing camera to go along with my double DIN Alpine head unit (theres a reverse camera hidden under the tailgate handle):

 

1E59F2D3-DCDF-46AE-85AA-BA36D3DF81C0_1_105_c.jpeg.2c6bf8cd54841a64cdd53da4cb4c34ef.jpeg

 

B4F591D4-D799-47FC-831A-514D7553C343_1_105_c.jpeg.cbf23a98384dd360e277b112ee30ddb1.jpeg

 

C4099D21-1584-4A50-8CCB-7F331101612E_1_105_c.jpeg.b4cbe04184c5da967ecb34d58e86244c.jpeg

 

B7E8764E-F011-428A-B8FD-95ACADA161A7_1_105_c.jpeg.0953a9b73fc659550399a9381d8ca783.jpeg

 

After that I stripped everything down for paint. I really don't have pictures of the prep process but it was a month or two of sanding, body work, and lots of dust. Next I turned my shop into a giant paint booth. Plastic up the middle to force air to move up and around (one shop door had filters and the other had filters and fans):

 

A5B6DCC0-51D3-48A2-B3AF-D9EF2DA992A4_1_105_c.jpeg.c70850536d9e0204302b671142cc64a3.jpeg

 

4D5A7C78-CE6A-47B8-A0B6-7DF3FB5B0A64.jpeg.7820abe4fdf987f6b25d0a0a4371cf62.jpeg

 

474C0E20-452F-42C7-938F-26E1E2CB59E8_1_105_c.jpeg.7a24b88e16828c0da1ff435d50bd6eeb.jpeg

 

3FF05679-5AD9-4CAF-B37D-0D981D6D47BC_1_105_c.jpeg.dd2ab6f4f6c76bd40c4b64c05349d61d.jpeg

 

I threw some sandable primer on and reblocked everything down followed by some sealer:

 

BE6C41FF-9582-40F2-8951-567DD67FDE57_1_105_c.jpeg.da3c075ddfa16167cb3ffc1d84d5f6e1.jpeg

 

Next it was time for color. Let me start by saying that my original plan was to paint it "Inferno Red Crystal Pearlcoat" (ARH) a Jeep color used on WK's. But after I decided to stuff the LS1 into it my Dad recommended I do something bright. So after much debate I finally settled on another BMW color (the blue XJ was Yas Marina Blue). Its an extremely gold color called "Austin Yellow" (B67). It came out ok for a garage paint job. I did have some lifting on the roof and tailgate (very slight in a few crevices... hence why I wish I had taken the entire thing down to bare metal) and the clear reacted with the basecoat in a few places where I put the first clearcoat on too thick. Luckily most of the imperfections are on the roof where they won't be seen or will be covered up by lineX on the bedside rail caps. Regardless it came out pretty good.

 

AE055FB0-845E-4555-8CD4-A37D0AB79C37_1_105_c.jpeg.3f5749c7565ecdbe0733b37cf0302b14.jpeg

 

27EABB35-0CFA-4652-B547-28B71BCFC871_1_105_c.jpeg.60c5a1abaaf3c1e59d4f26810e1b6c8c.jpeg

 

9027F151-24C7-41FE-8A47-DF8131F4D82D_1_105_c.jpeg.7457eb1db3d486d45f86341958a6deec.jpeg

 

0AA272CF-24FE-4987-89C4-4B4D89F517B5_1_105_c.jpeg.06fedb96bc67087009e8b54493c1f5f1.jpeg

 

1AB5D5C1-0321-4C56-A7AE-98AE032EA617_1_105_c.jpeg.d457b17cbdd0013a27c42be4b4054324.jpeg

 

Under the shop lights the color has a green hue but in the sunlight its more gold:

 

3F1D34B6-550B-445E-90AC-214806468D18_1_105_c.jpeg.e50c79d24d3fca2c03969ea13ad3f60f.jpeg

 

Next I threw a few parts on to get an Idea of what it'll look like:

 

0EFD4F5C-7C7A-4A0B-B483-E1952EF3B49F_1_105_c.jpeg.25bd21e097c47b7fd8fa9a0a1803b163.jpeg

 

39C7D256-30BD-4470-97D2-80C6B211A8BE_1_105_c.jpeg.1947a48f87d2d4acee81f71fd5216dd8.jpeg

 

After that I let everything sit for a few days to ensure the clear had cured before starting to bolt it back together:

 

4300580D-727F-4F8F-999D-1096DADE42C5_1_105_c.jpeg.aee518eeb80eb49095f4b25b6e0e3e02.jpeg

 

CC7DD658-3855-4768-8E95-BC9B8B3DFC06_1_105_c.jpeg.7cb6365eb0cd802fefeb55fe7b3f471f.jpeg

 

New glass front and rear. The rear is a CR Lawrance rear double slider. I love the functionality but its not a great fit. Oh well, there really isn't another option:

 

41277973-02F9-49E5-9EA7-AC0FE5B86EDA_1_105_c.jpeg.60f39cc7ddf838e657ae4b4f11309501.jpeg

 

CAEB648A-C582-4098-80B3-69D11E5426B5_1_105_c.jpeg.cb04692e83dcbdb0b749b04c01e31bf1.jpeg

 

617C9C2A-C02C-4464-9D9E-353EB3536194_1_105_c.jpeg.ca4dfa2af90b3b6b6d5e62235cf9a299.jpeg

 

29A02624-628F-4665-B431-B69068237FDE_1_105_c.jpeg.75089f2372ca15d7f0c24ee09ea05752.jpeg

 

I then cut and buffed the hood/fenders/flares... I still need to finish the rest of the cab. I started with 1500 grit, then 2000, then moved onto the 3M perfect-it system with all 3 compounds and pads. excellent results! 

 

10954F30-C883-491F-8307-B809C72FFB1D_1_105_c.jpeg.31a8f1b3511964a37d8be2477ef62f95.jpeg

 

243CC779-515D-41F7-91CF-EDD54ED0693F_1_105_c.jpeg.d126a06b2285a67d7fa07d510271d238.jpeg

 

C8282FF8-C57A-4B98-8A63-435A644E877F_1_105_c.jpeg.44c02f041e39a1bfeda0d680a6c01dac.jpeg

 

56D9B1CA-226B-4870-B959-F993D3478EB5_1_105_c.jpeg.d13cd9beca1f907c9c806d4b03dbb9f8.jpeg

 

Here's a shot of the factory ZJ drip trays for the vents. They drain just aft of the radiator support:

 

C11E49CD-66C1-475D-9862-D1489C2587A6_1_105_c.jpeg.078ccfa1284d89a4addf432483cbac8c.jpeg

 

2 boxes from Novak arrived! most of the conversion parts along with a brand new AX-15:

 

1392147A-B0AE-4849-8937-C34AB4D2FF3F_1_105_c.jpeg.1e42b84d39bbb38913bf411f1baf2f71.jpeg

 

The engine bay is ready:

 

53E8BDEC-2761-4A76-A627-97D013256543_1_105_c.jpeg.03cdf4d56d70fd25b3026f8d1dad3dd0.jpeg

 

0747D791-E3DF-4851-8A47-1E63789262F9_1_105_c.jpeg.ed2a27966aa948eaa3062a221ea7888a.jpeg

 

I made an entirely new harness from the cab back using Deutsch connectors. The harness includes the 5-wire HD camera wiring and I designed it so that each tail light can be unplugged individually instead of letting it hang while you struggle to pull out each bulb:

 

17B4E50B-2458-4D1C-BD27-13A4FD6885E3_1_105_c.jpeg.f4cda9d0d9a7058a3c710d6525ff1d08.jpeg

 

4DE8FC56-6511-4A2D-A0EF-63719AD97087_1_105_c.jpeg.15c48ee328e48298532dee29ab7d4049.jpeg

 

CBE49D49-36F6-46EC-B06A-726349B9035C_1_105_c.jpeg.44dfbb25760199fa52c6fb4a3698784a.jpeg

 

CC8C2DB7-FD6C-4659-81C4-1CA449636A88_1_105_c.jpeg.698306826b99582faf0ffefadb790a8f.jpeg

 

Lastly I found an old pic (circa 1999) of me and my HS MJ... '87 2wd 2.5L with zero options that I pained with lacquer in the driveway:

 

2913CAD6-3748-4DA7-8E8E-3B29AAD33F2A_1_105_c.jpeg.d0b6b79c614478af3ef186603d25452e.jpeg

 

Thats it! All caught up. Next I need to get the cab and underhood harnesses figured out. I plan to piggyback the XJ computer to run the factory '99 gauge cluster but I can strip out any wiring I don't need. It'll be a few long weeks staring at the FSM wiring diagrams before I can move on to getting the drivetrain together. more to follow!

Link to post
Share on other sites
On 12/16/2020 at 12:17 AM, SiXJaK said:

Wow. Nice build. I too have gone with the Notch fenders. They look so good in person.

 

Agreed. I like yours in contrasting color btw!

 

4 hours ago, 89 MJ said:

Looks great! You don't need to worry about losing it in a parking lot!

 

Thanks! hahaha, very true

Link to post
Share on other sites
On 12/18/2020 at 4:22 PM, USN_JeepMJ said:

 

Agreed. I like yours in contrasting color btw!

 

 

Thanks! hahaha, very true

Thanks but ackshully I’m not done. Just test fitting. Bumpers, rock sliders and fenders only are Linex’d in stingray, rest of the truck will be painted non Linex’d stingray. Will be shaping the fender flares to contour a little better against the body and using a black weather stripping between the two.

Link to post
Share on other sites

XJ harness is complete... let's just hope I didn't cut out anything important!

 

E804CD93-CB39-4C5C-B24A-4739806B005D.jpeg.fc49000928181eded9477327d0217e90.jpeg

 

LS1 finally off the pallet:

 

5C65B68A-B703-4FDE-9FA5-5B9C66C6182E.jpeg.52afce16c6061d9340dea8305b598693.jpeg

 

What a mess:

 

3A02C8A0-15EA-411D-9AEB-C14C1675BC07.jpeg.dd56e948c018e2cbb8ea6498d07ce8a8.jpeg

 

All clean! The C5 Corvette oil pan is way too wide so it had to go:

 

F7E3351E-BE4F-4FE0-91BB-7699FFB0F6D6.jpeg.183e8c28a755a79a0cdee4e5b404ad3d.jpeg

 

Time to start replacing seals. I replaced the valve cover gaskets, timing chain cover gasket, rear cover gasket, front and rear main seals, and of course oil pan gasket along with a new Holley oil pan:

 

3782DC1F-A6B1-4E9D-A347-E28863DAFEEF.jpeg.6c7f393c72c6e0fc36d498f5294db762.jpeg

 

ARP 12-point stainless hardware!

 

DC0F58F9-D5DA-4E98-83C5-48A6EC008575.jpeg.4a116be5af5f65e92124a0f4a9b9f026.jpeg

 

All back together! New plugs, wires, ceramic coated headers, harmonic balancer:

 

AC6F840C-767F-4A1F-87A4-E4DBE320C4F0.jpeg.61edc073c570f575c8f90f866dfb6806.jpeg

 

Brand new AX-15 with Novak bellhousing adapter and GM bellhousing: 

 

8F85F38B-EB3F-4CEB-AC97-E3A25FF7FA48.jpeg.25128710ab67966b256208d83c24621c.jpeg

 

Running to Summit Racing tomorrow to get a throwout bearing and should be ready to mate the two tomorrow! In the meantime, I started getting the engine bay ready"

 

9F357A1B-069A-4FDF-898E-1D04EC208B50.jpeg.ef5edaa0823016672474afcce29c83f3.jpeg

 

I threw my Warn M8000 behind the x-member in the inverted position (so that the fairlead lines up with the upper flat face of my JCR Crusader bumper) along with a Factor 55 offset fairlead. I'll be running a second fairlead on the bumper:

 

99E42AD1-A684-4AEC-91A7-2E9240D03453.jpeg.75f77e8f25e4bdd3c3091db7c5f60bd2.jpeg

 

Like a glove:

 

12F53481-37DC-49ED-B3F5-3286E751523D.jpeg.e8ce0f168111a87f80e82a6dc8429057.jpeg

 

I mounted it as far driver as possible. There is about an inch and a half on the passenger side. Not enough for a Zeon or any of Warns higher capacity winches but perfect for anything under 22" 

 

D34AD7BC-8B5B-4140-A538-CF8F9CCF956F.jpeg.59d90f27d6de1291e93863668e54a6e7.jpeg

 

I mounted the Corvette PCM and Novak tach/cruise module next to the XJ PCM. Hopefully it clears the alternator... only one way to find out! Of note, I also installed the only original MJ part that was retained besides the body... The windshield washer bottle! I mounted a new pump and drilled an additional hole and threw the XJ low windshield washer fluid sensor on. 

 

9599F317-4744-4EF4-9F90-7F10466E67DE.jpeg.12d15874f9da82e4b3c34c97a5decbe2.jpeg

 

Lastly I installed some Hella horns and Inline Tube stainless brake lines. The brakes lines are for a 97+ XJ... the rear line doesn't quite make it to where the factory MJ line terminated but I think it should be in a good spot for the flex line to the axle. 

 

848271F7-FC30-427E-BBCB-39E6CDA18081.jpeg.fda6ea03cdaf75a69671a5ba9031a1b0.jpeg

 

Hopefully getting the engine in tomorrow! 

 

 

Link to post
Share on other sites

Figuring out a throwout bearing was a pain. I should have just ordered a Novak adjustable throwout bearing when I ordered everything but I thought an adjustable pivot ball would be enough. I was wrong. Plus it being the holiday I was unable to get one ordered in time. Luckily I have a Summit local to me and I ran there on Saturday for a McLeod 16505 adjustable GM style bearing. It has stackable discs to adjust the height. Perfect!

 

0B4397AA-E117-4B4C-A9FE-C404F977AF23.jpeg.13c58f5b337f5953bf2d20f558aa0070.jpeg

 

4355F361-6305-4A71-B22D-C4AB4468E9E4.jpeg.8cdae3c7023e3140ab626ad05dd1c3b6.jpeg

 

E665840D-FD41-42E4-BEE0-201D50BF520F.jpeg.d24eedfd0ab9325dcfbbfa47c32d693d.jpeg

 

Next I installed a Novak external slave cylinder:

 

90114E17-BE05-4BAA-AA73-2BF3301665AB.jpeg.f176e9fe7dfab2994e66757eee74d38f.jpeg

 

And my factory XJ oil pressure sensor on an Amazon sourced M12 to 1/8" NPT adapter with additional M12 end so that I could install the GM oil temp sensor

 

FDD6E9BE-C48F-4313-9A1B-3991E6DDBB3E.jpeg.604b5464ea640ff4ff3d27a4dd557848.jpeg

 

Then it was finally time!

 

18E1E737-D6DD-4992-9970-71BA289F5A07.jpeg.fb1e0185f277857cccf75cb4a57ab02b.jpeg

 

Let me just say that this was not fun to do by myself but its in...

 

FDC1C012-FB14-4A48-89DA-38AA13EA990C.jpeg.c4136a2fdada6c30207073c7b32e4f68.jpeg

 

Valley cover and water pump installed:

 

0F6FB2CD-FC06-49C3-9432-6439810E76F9.jpeg.18501f1886ed2b8f343d7d0aed5f6cec.jpeg

 

Lastly I mocked up the front end. The bumper is good to go but the fascia is coming back off to install the wiring harness.

 

0D647FA3-6F42-4290-A8F1-94EF984F8CAF.jpeg.fe94611bf7dc420a1c4cc299c0839558.jpeg

 

22C69694-9E44-4E7C-804C-1FDA4087B32E.jpeg.e59a54522487e7fca32d8f3d76560116.jpeg

 

I'll have to get some pics of the radiator with the facia off but its HUGE and a super tight fit. With the a/c condenser installed I needed to clearance the facia a bit. Otherwise it all fits!

 

35B0CC85-A898-4EE1-9F1D-2AEC9921F182.jpeg.c3eac5bd69084a1b5a677c65a5affc89.jpeg

 

 

Link to post
Share on other sites

I pulled the facia off to add a modified harness to the back-side for the lights. Here are some radiator pics... this thing is huge!

 

AD57CCB9-076D-4504-B1A2-E4055FEE80FB.jpeg.f996f85e0e4e905ff2e0a69c3f57d13a.jpeg

 

52EC1DF0-2DC9-482F-960F-F281B7ADC50B.jpeg.71e9511be843020768921f0cca472960.jpeg

 

75E82A22-5758-4D72-AF24-12A5F4A17D22.jpeg.458c73db71909fa2a0ecee29ecee16bc.jpeg

 

Here's the winch pass-through:

 

6058DCA0-A2DF-46C3-B5EB-BC061A47891C.jpeg.98fd03211e960b1b8e3e283be478a5f5.jpeg

 

All buttoned back up. The wires through the grill will be for driving lights:

 

54EEDA0C-1181-4329-AF55-C7DF59255956.jpeg.241f0c271449a9d247ab68fbc8efecc4.jpeg

 

006369AB-4D95-4A78-B5C0-0867B80CC45E.jpeg.2891e3a0a8ac86bfa074e88ab3d82c69.jpeg

Link to post
Share on other sites
2 minutes ago, MiNi Beast said:

coming together very nicely. i bet you have some hard times sleeping at night gitty with anticipation of driving it. it will be a great day when you take the first drive. :D

 

haha, yup... I get excited about the next step every time I get close to completing something. I'm waiting on a few more engine parts so I'll be starting on the interior this weekend. can't wait!

Link to post
Share on other sites
On 1/7/2021 at 10:59 PM, MiNi Beast said:

mad respect for you and those that have the patience to build your jeep so miticisouly. i kinda came up the other way. :nuts:

 

Thanks!

 

Quick update from the weekend:

 

I cleaned up the old intake manifold:

 

469CA310-AA36-4049-97FF-519571ED8D2E.jpeg.52176acc47bcf91bf5c63ec96b0d1e68.jpeg 

 

Then hand painted the coil cover lettering:

 

036551EA-4B83-4383-9B1F-3958DE870F77.jpeg.3b44b5dd841ea33c033617f815491d82.jpeg

 

It took a few coats to cover well. you can still see some red here after 2 coats:

 

BEE8CB5E-88EB-4541-B7EE-B157A0C806C3.jpeg.4a356c676b21d7afe9bc5b5884cdaeb0.jpeg

 

In the end it came out looking pretty good! Much better than the red for sure:

 

EEA98040-51BB-436C-B26B-5C5D007F7279.jpeg.d06439089581cfa7bb013f35b9755ef0.jpeg

 

Checked clearance with the throttle body installed. I'm going to rotate the transmission 4° upward so it'll only get farther from the hood. Just need to clearance the trans tunnel a bit where the clutch fork extends before I can do that. Plus I'm still waiting on my long arm x-member and Holley alternator + a/c bracket to tie everything together on the drivetrain:

 

7B224601-4B35-4065-957C-E698F54A7B0F.jpeg.8d7fe4a778f628539dcf78d649ad4170.jpeg

 

While I wait for those parts, time to start on the interior:

 

BB4CA23B-DA86-456D-8254-AC78061B3AB7.jpeg.3703742cef945c0dadd7a059ef0d52b3.jpeg

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...