madog7200 Posted August 27, 2019 Share Posted August 27, 2019 IS THERE A COMPANY OUT THER THAT MAKES A REPLACEMENT CONTROLLER? I'm JUST ASSUMING THAT THE ANSWER IS A NO SO WHICH ONE OF THESE TERMINALS DOES THE SIGNAL PASS TROUGH TO TELL THE COMPRESSOR TO KICK ON THANKS IN ADVANCE GUYS! Quote Link to post Share on other sites
Ωhm Posted August 27, 2019 Share Posted August 27, 2019 A/C Clutch Relay engages the A/C Compressor, this relay is controlled by the ECU with information from HVAC Controller. B+ from C236_A (connector for circle in picture) , thru A/C Low Pressure Switch, thru A/C Clutch Relay (87 (4)) to A/C compressor. Quote Link to post Share on other sites
cruiser54 Posted August 29, 2019 Share Posted August 29, 2019 So, I think A (light green with tracer) might be what you're looking for. Quote Link to post Share on other sites
Manche757 Posted August 29, 2019 Share Posted August 29, 2019 . Quote Link to post Share on other sites
Vakarian Posted August 29, 2019 Share Posted August 29, 2019 Not to steal the thread but would this cause nothing on the AC system to turn on? The only air the comes through for me is when the fan speed is off and on vent. The fan doesn't turn on at all and all the vacuum lines are all attached. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.