Jump to content

Recommended Posts

A few months ago I brought my MJ in to get the headliner reupholstered. Long story short, the shop pulled the headliner then told me that the headliner wasn’t in good enough condition to reupholster. Not sure I agree but that’s besides the point.

 

Ended up driving around a few months without a headliner. After doing some research and seeing the positive reviews I decided to purchase a SMS headliner, which fits perfectly btw. 

 

The PO didn’t do a great job with the visors so I had them reupholstered. I’m in the process of installing them and having issues. Can’t figure out what is going on but the visor ends touch and don’t line up with the center brackets at all. Not sure what’s going on or what I might be missing.

 

Any ideas/advice would be greatly appreciated. 

BD7C35B9-6DD5-4037-B962-8B41DBDF0EEE.jpeg

7D578B53-AD7B-4149-8320-CAB2B267CC24.jpeg

3113B7C3-48F5-43C8-B0FF-5E717C39ADE1.jpeg

40A8BB49-458B-4600-A8D2-4CA14ECB1D0B.jpeg

Share this post


Link to post
Share on other sites

 

do not know if they can even be mounted on the wrong side ,had the mirror on pass side so i dident try that mistake:rolleyes:

Share this post


Link to post
Share on other sites

Slide the visors towards the mount on the rod, that may give you enough clearance for center clips.

 

edit: I missed the third pic. :dunno:

Share this post


Link to post
Share on other sites

aren't there 2 different types of visors where one variation has the latch points closer together than the other? 

Share this post


Link to post
Share on other sites

My visors wasent in place when i bought the MJ, had the same problem installing them untill i slide/turned the mount.

Not 100 sure but looks like the same visors and center mount i have... the other type have a different shape. 

 

Share this post


Link to post
Share on other sites
9 hours ago, fiatslug87 said:

Slide the visors towards the mount on the rod, that may give you enough clearance for center clips.

 

edit: I missed the third pic. :dunno:

 

Thanks this worked!

 

I wasn’t aware that the rods were adjustable and was worried about putting too much force on them since I just paid a decent amount to get them redone. Turned out great! Thanks for all the input and advice!

B575E78F-458E-4B0E-B18E-2D265B80D4DA.jpeg

87A10347-F278-4448-B791-7ED8DE6652CC.jpeg

Share this post


Link to post
Share on other sites
21 hours ago, Ls2xjcomanche said:

 

Thanks this worked!

 

I wasn’t aware that the rods were adjustable and was worried about putting too much force on them since I just paid a decent amount to get them redone. Turned out great! Thanks for all the input and advice!

B575E78F-458E-4B0E-B18E-2D265B80D4DA.jpeg

87A10347-F278-4448-B791-7ED8DE6652CC.jpeg

I really like your interior 

Share this post


Link to post
Share on other sites

Thanks! When I bought my comanche I wasn’t aware that black was a rare interior color. It’s almost done currently getting a bench seat reupholstered in black and the interior should be      almost complete.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...