Jump to content
MeanLemons

Bored throttle bodies

Recommended Posts

I don’t have any renix ones done. I still need to re-work the holding jig to center it. 

 

So yes thats a good question. I ll clarify my statement above 

 

15% off for 91+ throttle bodies. 

Share this post


Link to post
Share on other sites

I have two more renix TBs on the way.  Probably few weeks or so. 

 

As of that one I messed up... I welded the hole shut and I’m gonna bore through it again. 

Share this post


Link to post
Share on other sites

Finally had time to take the good renix TB outta my MJ and successfully bored it out to 60mm without blowing through the wall.

 

so I guess you could say I’m ready for renix version now on.

 

 

Share this post


Link to post
Share on other sites
10 hours ago, MeanLemons said:

Finally had time to take the good renix TB outta my MJ and successfully bored it out to 60mm without blowing through the wall.

 

so I guess you could say I’m ready for renix version now on.

Take any pics of the new shiny renix ver? :L:

Share this post


Link to post
Share on other sites

Not yet. I brought it into work for some glass beading    I should have pics up tonight when I bring it back home for re-assembly.

 

 

Share this post


Link to post
Share on other sites
On 6/26/2018 at 5:05 PM, MeanLemons said:

Before or after?

 

The stock size. The HOs are 62mm, just curious if the Renix is close..

Share this post


Link to post
Share on other sites
35 minutes ago, WahooSteeler said:

Have you put a price on these yet? 

I thought I did..

 

anyway. It’s $130 shipped. It’s $5 more than HO throttle bodies because it’s significantly more work. 

Share this post


Link to post
Share on other sites
4 minutes ago, HOrnbrod said:

 

The stock size. The HOs are 62mm, just curious if the Renix is close..

Stock size for the HO is 60mm at the top but tapers down to 56mm at the bottom (bottleneck). 

 

As for renix, the stock size is 52mm. I bore it out to 60mm

 

 

Share this post


Link to post
Share on other sites
3 minutes ago, MeanLemons said:

I thought I did..

 

anyway. It’s $130 shipped. It’s $5 more than HO throttle bodies because it’s significantly more work. 

Thanks! My bad if I missed it posted before...........

Share this post


Link to post
Share on other sites
2 minutes ago, MeanLemons said:

Stock size for the HO is 60mm at the top but tapers down to 56mm at the bottom (bottleneck).

 

I mean the Renix intake manifold hole. I have a 99+ intake on my HO and the intake hole is 62mm. Using a bored throttle body that's been punched out to 62mm all the way through. So it's a nice straight shot..

Share this post


Link to post
Share on other sites
9 minutes ago, MeanLemons said:

As for renix, the stock size is 52mm. I bore it out to 60mm

 

Thanks, didn't realize it was so small. 

Share this post


Link to post
Share on other sites

Here’s a pic of stock renix butterfly on top of stock HO butterfly plate 

 

and a pic of renix on top top of my 62mm plate

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×