Wood90 Posted June 30, 2017 Share Posted June 30, 2017 So I'm swapping in a 4.0 from a 2wd 1996 cherokee as well as the wiring from the cab forward with a gauge cluster from a 92. My comanche is a 4wd 1990. Both are aw4's, but which transmission should I keep? Link to comment Share on other sites More sharing options...
omega_rugal Posted June 30, 2017 Share Posted June 30, 2017 you are swapping only the engine? if the current AW4+TC works, leave that, not sure if the 4WD tranny (renix) will work with the 2WD one (HO) tcu Link to comment Share on other sites More sharing options...
Wood90 Posted June 30, 2017 Author Share Posted June 30, 2017 Well the engine along with little things here and there, I have the whole cherokee so is there any electronics on the HO tranny that I can swap onto my old tranny to make it work with the tcu? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
MeanLemons Posted June 30, 2017 Share Posted June 30, 2017 Why do u need to swap the wiring out? You can swap in the engine and still use the renix system. Link to comment Share on other sites More sharing options...
Wood90 Posted June 30, 2017 Author Share Posted June 30, 2017 The factory wiring is really butchered from the previous owner and the 96 has only 70,000 miles and OBD 2 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
ParadiseMJ Posted July 4, 2017 Share Posted July 4, 2017 A 2wd transmission will not work with a 4wd transfer case. The tranny and the engine MIGHT bolt up, but you won't be able to put a transfer case on the end of a 2wd tranny. You need a 4wd tranny. End of story. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now