MeanLemons Posted March 6, 2017 Share Posted March 6, 2017 On my 88 pioneer auto with the column shift. The bench seat is straight across, and on my 91 eliminator with the ax15. The bench seat have a notch in the middle (I suppose it's because to accodomate the mini console). I'm swapping in the ax15 into the 88 and I don't plan on using the mini console, I plan to have the boot mounted directly on the floor, and from my eyeballing it doesn't look like I would need to swap the seats. Is there a particular reason for the notch on the seats other than the mini console? Link to comment Share on other sites More sharing options...
Strokermjcomanche Posted March 6, 2017 Share Posted March 6, 2017 http://comancheclub.com/topic/49241-full-bench-non-cutout-in-5-speed-mj/page-2 Last post ... Link to comment Share on other sites More sharing options...
MeanLemons Posted March 6, 2017 Author Share Posted March 6, 2017 Thank you very much Link to comment Share on other sites More sharing options...
deziped1 Posted March 6, 2017 Share Posted March 6, 2017 I think the purpose of notch in seat was to provide more space for forward movement of the seat. The small shift console, when my seat is fully forward, protrudes about 3 - 3 1/2" into the notch. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now