Ignition wiring intensification help?

[DirtyDeeds]

ok guys I'm going to switch/push button start on my 87 MJ and need a lil help identifying what wires do what. if any one happens to know the color code and what color does what that'd be a big help!! also there's this momentary switch that was connected to another rod on the column that i need help identifying

 

first the black plug that was in the ignition switch

purple wire

black with white stripe

white with red stripe

red wire

orange wire

   

 

next the blue connector that was in the ignition switch

green wire

brown wire

yellow wire

 

then this switch

2 lime green wires

2 white wires

one big brown with black stripe

 

I'm trying to set it up with 2 switches , one for accessory power, one for ignition power and a push button for the starter, but I'm open for recommended set ups   :thumbsup:

[HOrnbrod]

You need to invest in an 88 electrical FSM...........

[DirtyDeeds]

You need to invest in an 88 electrical FSM...........

FSM?

[HOrnbrod]

Factory Service Manual. You can download it here:

 

http://comancheclub.com/topic/12083-electrical-manual/

[DirtyDeeds]

well ive been looking through it for the better part of an hour, ive found the connectors and the coding for the prongs, but it doesn't say what prongs go to what wire and what they are for. it has a general wire color guide, ive kinda pieced a little together though

 

black ignition connector

 

Red = battery

orange= fuel pump relay

black= ecu ground/ ecm ground

purple= not sure

white/ red stripe= not sure

 

Blue ignition connector

 

Yellow= starter switch

Brown= not sure

Green= not sure

 

and i still can't find anything about the other rod operated switch that was on the column