91 manche eliminator Posted February 26, 2017 Share Posted February 26, 2017 New to the frame mod game. Are stiffeners necessary for the mj? And if yall have rock sliders howd yall mount them to your frames? Link to comment Share on other sites More sharing options...
DirtyComanche Posted February 26, 2017 Share Posted February 26, 2017 You need to define what you're doing with the truck, what has been done to it as far as mods, and what you intend to do in the future as far as usage and mods. You don't normally need frame stiffeners. They might be a good idea depending on usage. When I had rock sliders I welded them on. Just two fairly large plates (probably about 4"x4"x.188" thick) that went on the side of the uniframe with rosette welds and stitch welds around them. I would probably not weld it that way again, but the basic concept was fine. Self tapping screws, threaded inserts, and bolted through sleeves are other common methods of doing it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now