895XJ Posted February 22, 2017 Share Posted February 22, 2017 As you can see, my vacuum switch is currently on the tail of the t case The new tcase has it located on top, does this swap over without issue Sent from my XT1635-02 using Tapatalk Link to comment Share on other sites More sharing options...
ARareBreed Posted February 22, 2017 Share Posted February 22, 2017 Yes. Depending on the wiring of your manche, I'd just add an electric switch and connect to the black/red tracer wire in the engine bay above the blower motor near the firewall. Does your D30 have vacuum disco? Link to comment Share on other sites More sharing options...
Green Mesa XJ Posted February 22, 2017 Share Posted February 22, 2017 I've got two np231 cases (91 & 92) , both have the port in the front like you're new one (as do the 88 np231 & 85 np207 I have) . thought the back port for the switch was later years. I think you can just swap the vacuum switch to that position you ought to have enough vacuum harness since it was connecting to the back of the case. If you don't have a vacuum disconnect axel you could eliminate the vacuum part of it if you want. Sent from my iPhone using Tapatalk Pro Link to comment Share on other sites More sharing options...
cruiser54 Posted February 23, 2017 Share Posted February 23, 2017 Here's what I'd do: http://comancheclub.com/topic/17377-cad-fix-1/ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now