Oldred87 Posted February 19, 2017 Share Posted February 19, 2017 Hello all, I'm in the process of trying to get my dash out of my comanche and it seems like there is one last little spot holding me up that i can't figure out. The defroster trim piece cowl piece near the windshield seems to be hung up right where the defroster vent hooks to it. I'm assuming its snapped in but i have tried tugging on the cowling piece and it won't pop lose. I'm just wondering if there are any special tricks or a way it unclips that I havent seen. Trying not to break it and this is the last piece I need off to get to the bolts behind it and then the whole dash should come out. Any help will be great. Thanks Link to comment Share on other sites More sharing options...
Strokermjcomanche Posted February 19, 2017 Share Posted February 19, 2017 There are 5 Phillips head screws that need taken out and it's also clipped in , just take time and patience and it will come out . Link to comment Share on other sites More sharing options...
Oldred87 Posted February 19, 2017 Author Share Posted February 19, 2017 Thanks all the screws were taken out. Just seems to be cliped in the one spot. Sounds like i just have to slowly work it out Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now