ComancheKid45 Posted February 24, 2006 Share Posted February 24, 2006 Hey guys, i gotta swap out my bad crank sensor and was wonderin if any of u guys have any info or even a diagram of where its excatly located......i figured someone on here would know. Thanx 8) Link to comment Share on other sites More sharing options...
mjeff87 Posted February 24, 2006 Share Posted February 24, 2006 It's on the bellhousing at about the 1 o'clock position (if you're facing the engine from the front). It's held in by 2 bolts, and it's kind of a PITA to get on them. You may want to unbolt the tranny crossmember and lower it some to get better acess to them, and use a combination of socket extensions to reach. There should be a little plastic "sheild" that the sensor sits inside....make sure you don't loose it, and reinstall it when you put the new sensor in. It will help to prevent a dropped bolt falling down inside the flywheel area :oops: Jeff Link to comment Share on other sites More sharing options...
Pete M Posted February 24, 2006 Share Posted February 24, 2006 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now