Jump to content

no turn signals


Recommended Posts

My turn signals do not work however the hazards do work all fuses checked also swapped the hazard flasher relay for the turn signal in fuse box but still no luck also my wiper wouldnt park and would only work on max speed checked out the intermittent delay module and the thing was completely toast broken parts and heavy rust inside do you think that might have something to do with the turn signals not working? nd if not is there a way to test the turn signal switch on the column to know if its bad..like what color wires for left and right signals coming from the steering column

Link to comment
Share on other sites

 

There's a in and out switch on the steering column on the right side pull it out or in in the turn signal should work.

Sent from my iPhone using Tapatalk

Any pictures of what it look like?

 

I think he means the Hazard switch maybe?

But, you already said the Hazards work. 

 

That said, are you saying all the flashers work outside the vehicle just fine, with or without headlights on? 

Link to comment
Share on other sites

 

 

 

There's a in and out switch on the steering column on the right side pull it out or in in the turn signal should work.

Sent from my iPhone using Tapatalk

Any pictures of what it look like?

I think he means the Hazard switch maybe?

But, you already said the Hazards work.

 

That said, are you saying all the flashers work outside the vehicle just fine, with or without headlights on?

Yess all hazard lights work outside with and without the headlights on

Link to comment
Share on other sites

I had a similar issue several years ago.  Flashers worked.  No turn signal or brake lights.  I first replaced brake light switch.  Did not fix it.  I studied the wiring diagram and found the common connection for the two was the turn signal directional switch.  Replaced it and the problem was fixed.  I have not had the problem since.

 

http://www.morris4x4center.com/turn-signal-switch-directional-56002011.html

Link to comment
Share on other sites

I had a similar issue several years ago. Flashers worked. No turn signal or brake lights. I first replaced brake light switch. Did not fix it. I studied the wiring diagram and found the common connection for the two was the turn signal directional switch. Replaced it and the problem was fixed. I have not had the problem since.

 

http://www.morris4x4center.com/turn-signal-switch-directional-56002011.html

I was hoping that switch wouldnt have been the issue as i don't have the tools required to remove the steering but the more research i do is the more i realize I'm gonna have to bite the bullet and get the tools and that switch and a couple 6packs

Link to comment
Share on other sites

Hazard and turn signals are on different fuses...........

 

He said is hazards work, but turn does not.  I found that when I had similar issues.  The signal switch was the common unit for both the TURN and BRAKE.

Link to comment
Share on other sites

 

Hazard and turn signals are on different fuses...........

 

He said is hazards work, but turn does not.  I found that when I had similar issues.  The signal switch was the common unit for both the TURN and BRAKE.

 

Yet they're on different fuses........

 

Don't think he should check that? 

 

One fuse is Turn B/U and the other is Haz/Stop.

Link to comment
Share on other sites

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...