Jump to content

Transfer Case Linkage


Recommended Posts

I am finishing up my AX-15 installation and I am missing the transfer case linkage.  I looked into the Novak linkage but it is a little pricey.  Has anyone used another linkage that worked. Has anyone used the 231 HD Shift Linkage (Manual Trans) - Boostwerks Engineering.  The price is awesome compared to the Novak.  What's the difference between the two?  Thanks

Link to comment
Share on other sites

Novak is cable, and aftermarket shifter stick.

Boostwerks uses a heim/allthread straight linkage direct from stock shifter to modified  lever at the t-case.

I'm going to go boostwerks on my MJ, when I do 4WD swap, and will at some point on my XJ.

Minus the new t-case side lever, you could source allthread and heim joints local. But, for the price of the kit I think it's worth it.

Link to comment
Share on other sites

I use a Novak linkage on my XJ with an NP241OR swapped in. Takes some dialing in initially, but haven't touched it since. Yes, it is pricey. Yes, it works.

 

I have no first hand experience with this one (heard good things), but I'll probably put one in my MJ when it's time...

http://www.azzysdesignworks.com/store/jeep-np231-transfer-case-linkage-kit

Link to comment
Share on other sites

 

 

Junkyard not an option?

 

Sent from my SM-G930T using Tapatalk

Not really.  The junkyards around here are not great.  

 

 

BTW where are you in VA? I just moved from Richmond and there are 3 pick-n-pulls and quite a few traditional yards that I've had good luck with.

 

I'm in Northern Virginia...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...