Double Six Posted June 24, 2016 Share Posted June 24, 2016 The service manual says it's on drivers side. the only thing I found on drivers side says don't remove on it. it has a torx fitting, some big one. it :hmm: is a seamless tranny I don't know what kind. except it's a 4-speed. 86 Comanche 150 ci. Thanks for your help . I drained tranny now can't locate the right fill plug. Link to comment Share on other sites More sharing options...
Marine1Texas Posted June 24, 2016 Share Posted June 24, 2016 AX4 fill location is passenger side of the trans picture below alternatively there is a torx plug on the driver side of the trans, about half way up the side that can be used to fill as well. Also you can fill from the shifter hole Image Not Found Link to comment Share on other sites More sharing options...
Double Six Posted June 24, 2016 Author Share Posted June 24, 2016 Would you happen to know what size torx that is? Thanks for the info. :thumbsup: Link to comment Share on other sites More sharing options...
Big Dan Posted June 25, 2016 Share Posted June 25, 2016 It's not a torx bolt that you want to remove. It's a 24mm nut, if I remember correctly, on the passenger side. Link to comment Share on other sites More sharing options...
Double Six Posted June 25, 2016 Author Share Posted June 25, 2016 I found it,thanks for the pic. I got it out with a pair of vise- grips and filled her back up with fresh 75- 90 w synthetic blend,just made a test drive and it shifts ever so smooth.thanks again man .I have gotten so much good knowledge from this site,it's great !!! :thumbsup: Link to comment Share on other sites More sharing options...
88whitemanche Posted June 25, 2016 Share Posted June 25, 2016 Iirc doesn't that bolt say do not remove? Link to comment Share on other sites More sharing options...
Double Six Posted June 25, 2016 Author Share Posted June 25, 2016 Iirc doesn't that bolt say do not remove? I'm not lirc but the one on drivers side on mine, said not to remove ,the one on passenger side didn't say anything. anyway I got it done thanks a lot guys!!! Link to comment Share on other sites More sharing options...
buckwheat Posted June 25, 2016 Share Posted June 25, 2016 hahaha. Sorry, laughing aside, if you see iirc on the internet it stands for 'if I recall correctly'. Link to comment Share on other sites More sharing options...
Double Six Posted June 28, 2016 Author Share Posted June 28, 2016 hahaha. Sorry, laughing aside, if you see iirc on the internet it stands for 'if I recall correctly'. yeah I'm a little slow to all this computer talk,thanks for explaining though. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now