WNY-J24 Posted December 12, 2015 Share Posted December 12, 2015 Just bought a 1986 lwb 2.8 v6 2wd comanche with front end damage. Seems like it was a barn find 36k miles and the front was smeared in traffic. Haven't tried it myself but seller says the engine runs and auto tranny works. Listing parts with prices obo Rochester ny (Some items already possibly taken/on hold by local mj friends. Lwb bed, doors interior colored plastics, bench bracket, tailgate, taillights) Update: adding parts Lwb gas tank skid plate $? I added photos it doesn't look exactly like the diagrams online but it is a plate and not just straps Steel bumper $80 (Says 8000 lb tow weight) some surface rust but looks solid Tan leather (pleather?) Bench great condition no rips or spots $130 Rear non slider glass $20 Rear glass gasket $45 Cab side vent trim $30 Wheel hub covers $40 for 4 Wheel steel trim $25 for 4 Lwb gas tank with fuel sender $75 (Anyone know if this 86 lwb 2.8 version is compatible with later years?) Really nice vinyl floor $? let me know if you want to know about any parts I didn't mention. All interior non colored parts are available (heater unit radio, dash....) Still have to check and see what rear axle type it is, if there are any skid plates Link to comment Share on other sites More sharing options...
WNY-J24 Posted December 12, 2015 Author Share Posted December 12, 2015 Link to comment Share on other sites More sharing options...
WNY-J24 Posted December 12, 2015 Author Share Posted December 12, 2015 Link to comment Share on other sites More sharing options...
WNY-J24 Posted December 12, 2015 Author Share Posted December 12, 2015 Link to comment Share on other sites More sharing options...
rmoore1031 Posted December 12, 2015 Share Posted December 12, 2015 You already know what I want!! Link to comment Share on other sites More sharing options...
WNY-J24 Posted December 13, 2015 Author Share Posted December 13, 2015 Link to comment Share on other sites More sharing options...
WNY-J24 Posted January 9, 2016 Author Share Posted January 9, 2016 Bump Link to comment Share on other sites More sharing options...
rmoore1031 Posted January 10, 2016 Share Posted January 10, 2016 Add the steel bumper and metal skid plate to my want list. Link to comment Share on other sites More sharing options...
NorthWoods Posted January 15, 2016 Share Posted January 15, 2016 Do you still have that vinyl floor? Link to comment Share on other sites More sharing options...
WNY-J24 Posted January 15, 2016 Author Share Posted January 15, 2016 Yup Link to comment Share on other sites More sharing options...
SBpunk Posted January 15, 2016 Share Posted January 15, 2016 Sorry pics aren't loading on my computer. Is it bench or bucket seats if you have brackets? Link to comment Share on other sites More sharing options...
WNY-J24 Posted January 17, 2016 Author Share Posted January 17, 2016 Bench brackets and they are taken sorry Link to comment Share on other sites More sharing options...
Jaxso32 Posted January 19, 2016 Share Posted January 19, 2016 what do you want for the taillight wiring harness? Link to comment Share on other sites More sharing options...
Strokermjcomanche Posted January 19, 2016 Share Posted January 19, 2016 what do you want for the taillight wiring harness? Hope you have an 86 , but looks like you have an 88 which is different . Link to comment Share on other sites More sharing options...
WNY-J24 Posted January 19, 2016 Author Share Posted January 19, 2016 Plugs for the light bulbs may be the same. The other end of the harness might be different as stroker says. Do you need a whole harness or just the end? Link to comment Share on other sites More sharing options...
Mj4life Posted January 19, 2016 Share Posted January 19, 2016 Any holes in the gas tank? Link to comment Share on other sites More sharing options...
WNY-J24 Posted January 19, 2016 Author Share Posted January 19, 2016 Should be taking the bed off in the next week or two, I can let you know then. I want to get the tank out and skid plate if someone wants them. This is the best I can see so far Link to comment Share on other sites More sharing options...
WNY-J24 Posted January 19, 2016 Author Share Posted January 19, 2016 Link to comment Share on other sites More sharing options...
Mj4life Posted January 19, 2016 Share Posted January 19, 2016 I'll definitely be interested in the gas tank. Would it fit a 87? Link to comment Share on other sites More sharing options...
WNY-J24 Posted January 19, 2016 Author Share Posted January 19, 2016 It should fit a long bed of any year (experts can chime in) but the fuel pump and sender is likely different for any year after 86 since the 2.8 v6 changed to the 4.0 I6 Link to comment Share on other sites More sharing options...
Mj4life Posted January 19, 2016 Share Posted January 19, 2016 Hopefully lines and the sending unit from my mj fit right on lol. Link to comment Share on other sites More sharing options...
Jaxso32 Posted January 21, 2016 Share Posted January 21, 2016 Damn, i was hoping it would be similar enough to the 88. i need the whole harness the last owner hacked and spliced up the harness pretty badly, but thanks for the heads up stroker Link to comment Share on other sites More sharing options...
NorthWoods Posted January 24, 2016 Share Posted January 24, 2016 Still interested in the vinyl floor. Link to comment Share on other sites More sharing options...
WNY-J24 Posted January 25, 2016 Author Share Posted January 25, 2016 I got most of the gold interior out. I will pull the vinyl for you in the next week most likely. Link to comment Share on other sites More sharing options...
NorthWoods Posted January 25, 2016 Share Posted January 25, 2016 Are you planning on pulling the whole heater assembly out? If so, id love to get the whoke foam/rubber mat that goes under the carpet and behind the dash. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.