Jump to content
Ronnie

Cup Holder - Another One

Recommended Posts

Found this - Used it and so far, so good

 

This is actually a behind the seat cup holder and tray.

 

I used some blue tape to mark a line and my dremel to trim the edge off the tray. This provides a large flat surface that I slid under my bench seat. This holds everything in place very well. It does limit the travel of the seat but, works well for me and get's my wife close enough for her to drive.

 

Purchased from WalMart

 

tqF2MTm.jpg

 

5Om6C9R.jpg

 

Ta - Da...

 

kzklIXZ.jpg

 

Share this post


Link to post
Share on other sites

Yep, nice and sturdy.  The tray part that is trimmed is about 10" long and 10" wide and fits tightly under the seat. I can't see it tipping at all.

Share this post


Link to post
Share on other sites

Here are some additional pics. I hope it helps.

 

This is a top view so you can see how much of the trimmed tray slides under the seat.

 

2Fbi0EC.jpg

 

Here is a profile of the tray after I trimmed it down with the dremel so it would slide under the seat.

 

XJ2msaX.jpg

 

I shared this just because I took the picture....

 

NoGFLWK.jpg

 

Good luck, have fun...

Share this post


Link to post
Share on other sites

That thing looks great, going to weigh this against my current setup and see if I can live with the idea of no more arm rest.

Share this post


Link to post
Share on other sites

I bought and modified one of these this weekend.  Works great, looks great, stays in place yet simple removal.  If you don't like high high it sits (about 1.5" above the seat) you can just pull out the insert (light grey) and mount that with screws/velcro.  Thanks for sharing

Share this post


Link to post
Share on other sites

This looked like an awesome alternative to keep my clean bench seat but after searching Walmart I came up empty handed. I tried finding one online and Walmart only sells them in store and nobody else listed this exact piece sadly. :-/ I'm going to check Target and some local auto parts just in case.

Share this post


Link to post
Share on other sites

Well Target was a strike out for me, but I checked this week on a whim and Walmart now will sell them through their site. So I ordered one for in-store pick-up and sure enough got it in a few days later!

Share this post


Link to post
Share on other sites

These are still available online at Walmart. I bought one about 4 months ago. This thing fits awesome like it was meant to be there.

Share this post


Link to post
Share on other sites

Kudos to Ronnie for original post 2013.  I looked today in a local Walmart and did not find them.  I looked online and did find them at Target.  The online price this morning was $12.29. I bought 2 for 87 and 89 MJs.  They were ready for pick up at store in two hours. The local Target had them on hand for $19.99.  Glad I bought online and no shipping charge.

Share this post


Link to post
Share on other sites

Hey gang. I’ve been rolling one of these cuoholders since 2014. Big ups to Ronnie for the original discovery.

Autozone also carries this item. It’s where I found mine, and I have seen one in stock at my local store recently.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×