Jump to content

Slave Cylinder Woes


Recommended Posts

Welp I get to put a new internal slave in my ax-15 soon as I can tell mine is slowly dying, I've replaced the master and hydraulic line already and bled the system multiple times but the pedal still occasionally goes straight to the floor and brake fluid leaks out of my bellhousing slowly but surely.... but the question is which brand would you guys recommend as I've read that some only lasted a short period of time before going ka-put

 

Link to comment
Share on other sites

Is it possible that you're doing something wrong with the installation??

 

When I replaced my slave on the old BA-10, I basically did the same job you're descibing. I got the part from NAPA...it lasted for a good 20K miles before I swapped in the AW4.

Link to comment
Share on other sites

Most folks swear by Luk Clutch kits. Apparently they're pretty good, from what I gather. I went with one from the local parts store; seems to be doing good so far after 2k miles. :dunno:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...