Jump to content

Closed cooling question


Recommended Posts

Ok my cooling issues all make sense now! I have had the crack in it since the thermostat stuck and it overheated, blowing a small hole in the bottle. So I replaced the stat and burped the system and it drove fine for a week then it overheated again and coolant was spraying out of the overflow bottle. I burped it again and put some epoxy on it for now until I can make it to the JY.

Link to comment
Share on other sites

There are a few companies making them out of aluminum, and are really good. Also, check with napa, I think one of the parts stores had them new, dealer too.

 

Because a JY bottle will have the same problem yours has. Its old, dry, and brittle.

 

Rob L. :thumbsup:

Link to comment
Share on other sites

So I replaced the stat and burped the system and it drove fine for a week then it overheated again and coolant was spraying out of the overflow bottle.

Correction. That hunk of plastic is NOT an overflow bottle. It is a surge tank and it is an integral part of the pressurized cooling system.

Link to comment
Share on other sites

Mine just cracked and I ordered one on Ebay for $16 + plus shipping came to about $25. Here is one:

 

http://cgi.ebay.com/ebaymotors/87-88-89 ... ccessories

 

I ordered on Sunday, shipped out Monday and I got it today. I also bought a Jeep from Steve White motors they are a good dealer to do business with.

 

x2.....I would definently buy from him again :cheers:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...