Hick Posted April 17, 2010 Share Posted April 17, 2010 I have an 89 S10 rear bumper, will it fit a 87 Comanche? Are there adapters to make it fit? Does anyone have one (a bumper) cheap? Link to comment Share on other sites More sharing options...
jimoshel Posted April 17, 2010 Share Posted April 17, 2010 I'm parting a S10 out now. Wait an hour and I'll have a answer for ya. Link to comment Share on other sites More sharing options...
jimoshel Posted April 17, 2010 Share Posted April 17, 2010 The S10 frame and bumper is narrower than the MB. It can be made to fit. Depending on your fabrication skills or $$ situation. In my opinion take the S10 bumper, Cut the old mounts off. Get a set of mounts from ebay, or make a set. MB Upper, S10 Lower Link to comment Share on other sites More sharing options...
Hick Posted April 17, 2010 Author Share Posted April 17, 2010 Will a cherokee bumper fit? Link to comment Share on other sites More sharing options...
jimoshel Posted April 17, 2010 Share Posted April 17, 2010 Just looking, it looks like it would. Use the XJ face plate and the MB mounts. Link to comment Share on other sites More sharing options...
WahooSteeler Posted April 18, 2010 Share Posted April 18, 2010 viewtopic.php?f=7&t=13865&hilit=s10+bumper Link to comment Share on other sites More sharing options...
Darren Posted April 18, 2010 Share Posted April 18, 2010 Jim I'd like to present you with this trophy, on behalf of everyone here at Comanche Club, for your amazing effort to answer a question most would have shrugged off. You really went above and beyond on this one, and we commend you for it. Hopefully "Hick" is as grateful. Link to comment Share on other sites More sharing options...
jimoshel Posted April 18, 2010 Share Posted April 18, 2010 :oops: Link to comment Share on other sites More sharing options...
wannabeMJ Posted April 18, 2010 Share Posted April 18, 2010 looking at this post right now I'm wondering if I would keep mine to I think I also have an S-10 bumper on my MJ but mine was sticking out so far out back I might cut the bottom of the bed just under the tail lights (anyway there rusted to sh*t) and try to fit the bumper right to where the bed ends and right under the tail gate Link to comment Share on other sites More sharing options...
one_bad_MJ Posted April 19, 2010 Share Posted April 19, 2010 5" C channel welded toy ouyr bumper brackets works too heavy duty and it won't bend Link to comment Share on other sites More sharing options...
Hick Posted April 19, 2010 Author Share Posted April 19, 2010 Jim I'd like to present you with this trophy, on behalf of everyone here at Comanche Club, for your amazing effort to answer a question most would have shrugged off. You really went above and beyond on this one, and we commend you for it. Hopefully "Hick" is as grateful. :agree: Thank you!!! :cheers: Link to comment Share on other sites More sharing options...
jimoshel Posted April 19, 2010 Share Posted April 19, 2010 Your welcome. I had the S10 and the MB so it was no biggy. Jim Link to comment Share on other sites More sharing options...
streetjeep2.5 Posted April 19, 2010 Share Posted April 19, 2010 Yea, really! Above and beyond. BTW, your MB might be an MJ! :smart: Link to comment Share on other sites More sharing options...
jimoshel Posted April 19, 2010 Share Posted April 19, 2010 OOOPS. :oops: Link to comment Share on other sites More sharing options...
dasbulliwagen Posted April 19, 2010 Share Posted April 19, 2010 A cherokee bumper will not bolt up to an MJ without custom made brackets and trimming of the end caps. Though I havent tried it the MJ brackets if you still have them may bolt in place of the XJ brackets and allow it to be bolted up with trimming of the endcaps... though I really don't know for sure. I made brackets to mount an XJ bumper... Link to comment Share on other sites More sharing options...
jimoshel Posted April 19, 2010 Share Posted April 19, 2010 Looks good. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now