livinginh Posted February 15, 2010 Share Posted February 15, 2010 1986 MJ, I have tracked it down to somewhere between were the harness comes into the cab. My wipers started working as soon as I grabbed the harness on the outside where it goes into the cab and jiggled it around. So am I to assume I need to pull my harness apart where it goes into the cab and clean all of it or is there another issue I am missing? I have full voltage under the hood, but only on a few of the fuses inside the cab. My generator light still stays on dim, but alternator and battery are both tested good. I can get my heater motor to work if I jump straight from the fuses box to the switch on the dash. Still no dash lights or horn. Link to comment Share on other sites More sharing options...
mythreesons Posted February 15, 2010 Share Posted February 15, 2010 Maybe it's had a little fluid leakage problem on the fusebox? Is the fusebox nice and tight to the firewall on both sides? Strange problem. I don't have anything else that it could be right now. Scott Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now