Need wiring diagram for retrofitting a 91+ with an OE clock

[krochus]

Unfortunately it appears as though the ONE source everyone on the web relied on for this info is KAPUT http://gojeep.willyshotrod.com/HowtoDashClock.htm

 

I have a Nippon Seiki clock that I'd like to install but I have no idea what the pinouts are?

[Boilermaker]

'91 Clock wiring Diagram

[krochus]

'91 Clock wiring Diagram

 

 

I appreciate the help but the diagram you have there as far as I can ell appears to be for one of the other clock plugs aside from mine (supposedly there's 3)

 

I have a 10 pin connector with 5 being used all on one side

pink - grn/blk - blk - orange/blk - blue/red on the jeep side of the connector

[Boilermaker]

This is part of a chart of a chart i made when putting an older clock into my '92. The info probably came from go-jeeps site. It seems to match up better to what you are describing.

 

       Clock Side    Dash Side      Function
Pin A	red           pink    	    12v power
Pin B	orange        green/black    switched 12v power
Pin C	black         black          ground
Pin D	white         orange/black   panel dimmer
Pin E	yellow        blue/red	    lights on input

[krochus]

This is part of a chart of a chart i made when putting an older clock into my '92. The info probably came from go-jeeps site. It seems to match up better to what you are describing.

 

       Clock Side    Dash Side      Function
Pin A	red           pink    	    12v power
Pin B	orange        green/black    switched 12v power
Pin C	black         black          ground
Pin D	white         orange/black   panel dimmer
Pin E	yellow        blue/red	    lights on input

that's it for sure

 

how bright are these clocks in the dark if you were to omit wiring pin D and E for simplicities sake?

[johnnyc]

I put a 91 Nippon Seiki clock in my old 96 XJ a few years back. I just wired up the constant power, switched power, and ground using go-jeep's guide. I omitted the other two wires and it was not blindingly bright. I didn't think it was a problem at all.

[dasbulliwagen]

I put a 91 Nippon Seiki clock in my old 96 XJ a few years back. I just wired up the constant power, switched power, and ground using go-jeep's guide. I omitted the other two wires and it was not blindingly bright. I didn't think it was a problem at all.

 

I think the other wires go with the dimming feature when you turn the headlights on, so brightness should be adjustable that way with a factory style clock.

[johnnyc]

Well that's what I'm saying. The clock is not so bright, so the dimming feature is not needed. Two less wires to hook up.

[88SporTruck]

Try this link

 

http://web.archive.org/web/200802290626 ... hClock.htm