azscott Posted December 20, 2009 Share Posted December 20, 2009 Does anyone know the proper term or..where to get the floor seal for a 5 speed transmission. This is NOT the rubber boot that fits ON the center console but rather the inner one that actually screws to the floor/center hump and keeps the floor sealed. Mine is dry rotted and I get a nasty tranny fluid odor when I open the windows as the seal is shot and air is coming up from the hole in the floor for the shifter. scott Link to comment Share on other sites More sharing options...
knever3 Posted December 21, 2009 Share Posted December 21, 2009 This is the one you need. I ordered one a few months ago and it worked great and exact replacement. They may have lowered the price because I remember paying $25 for mine. This one is only $7 plus shipping. I glued mine down with polyurathane calk you can get at Home Depot. http://www.quadratec.com/products/52110_01.htm Hope this helps. Link to comment Share on other sites More sharing options...
garyindiane Posted December 21, 2009 Share Posted December 21, 2009 Does this work with the pukegoat? I just found out mine was destroyed yesterday. Thanks in advance... -gary Link to comment Share on other sites More sharing options...
azscott Posted December 21, 2009 Author Share Posted December 21, 2009 ..well mine is a Pukegoat so we will see...I did not order the one pictured above but another one from the same catalog as it looked to be a better fit. Link to comment Share on other sites More sharing options...
knever3 Posted December 21, 2009 Share Posted December 21, 2009 Yes it does, that's what I have. The ax-15 and the ba-10's floor shift stalk is the same so this will work. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now