sandmanwv Posted November 8, 2009 Share Posted November 8, 2009 Needed rear driveshaft for 86 MJ 4x4 long wheelbase Link to comment Share on other sites More sharing options...
Geonovast Posted November 8, 2009 Share Posted November 8, 2009 A ton of things affect driveshaft length. Wheelbase Rear Axle (different axles have different yoke lengths) Motor Transmission T-case Any lift Link to comment Share on other sites More sharing options...
sandmanwv Posted November 11, 2009 Author Share Posted November 11, 2009 This MJ is completely stock. Link to comment Share on other sites More sharing options...
Geonovast Posted November 11, 2009 Share Posted November 11, 2009 Well that covers one of them. Which motor do you have? 2.8 or 2.5 Which transmission do you have? Manual or Automatic Which transfercase? 207 or 228/229 Which rear axle? Most likely a Dana 35, but if yours is the metric tonne, you'll have an AMC 20 Link to comment Share on other sites More sharing options...
akamcbird Posted November 15, 2009 Share Posted November 15, 2009 i have a a rear ds for an '86 2.8l v6, tf auto, np207, and d35. but I'm in AK if you want to cover shipping.... i also have the front shaft wich is rebuilt, was reinstalled and driven about 3/4 of a mile b4 i totald the truck. Link to comment Share on other sites More sharing options...
Pete M Posted November 16, 2009 Share Posted November 16, 2009 tried car-part.com yet? Link to comment Share on other sites More sharing options...
88mjmanche Posted November 17, 2009 Share Posted November 17, 2009 ive got one for a I6, 5 speed, 231 and a D35 Link to comment Share on other sites More sharing options...
Recommended Posts