banjobill80 Posted November 8, 2009 Share Posted November 8, 2009 Hi I recently bought a 86 Mj It has a Meyers snow plow that looks like it was built just for the comanche No chessy universal brackets exc. The brack bolts in place along the sides of the frame and is noched out around the sway bar the factory bumper is also bolted to it all the notchs are factory cut and holes drilled no crappy torch work. What I was wondering is if this plow would fit other models of Jeep or just the comanche? I have heard something to the effect of that the comanche and the cheroke were the same from the firewall up If so for what period/model years? I was thinking of haghing onto the plow if it would fit other jeeps But have no plans of pushing snow with this one. Thanks for any info.. Bill... Link to comment Share on other sites More sharing options...
Geonovast Posted November 8, 2009 Share Posted November 8, 2009 If it'll fit an MJ, it'll fit all MJs and all XJs. That portion of the XJ/MJ was not changed. Link to comment Share on other sites More sharing options...
freakjeep93 Posted November 8, 2009 Share Posted November 8, 2009 ya beat me genovast....but :agree: Link to comment Share on other sites More sharing options...
Eagle Posted November 8, 2009 Share Posted November 8, 2009 AMC sold Meyers plows through dealers as the factory-endorsed rig, so it most likely is a mount that was engineered specifically for the XJ and MJ. And, as already noted and confirmed, it will fit any MJ (Comanche) and all XJs (Cherokee) from 1984 through 2001. NOT Grand Cherokee. Link to comment Share on other sites More sharing options...
banjobill80 Posted November 8, 2009 Author Share Posted November 8, 2009 Thanks guys makes this set up a lot more usefull then I thought It might be. Wish I still had the wifes ole 99 cheroke now sure would beat the tractor :fs1: Bill.. Link to comment Share on other sites More sharing options...
Wildman Posted November 8, 2009 Share Posted November 8, 2009 :agree: With the above statements. Also.......if this is truly a OEM mounted plow, the front bumper will be mounted on the outside of the plow undercarriage, with the "light" bar / pump mount behind the front bumper, and it will have extended bumper ends, longer than the stock bumper ends. Check the front end of the Uni-body / frame for any damage, I've seen one MJ where the front frame section was bend down and cracked from the use of a Meyers plow. In the time..........Both Myers (the "2 Meter plow" OEM) and Sno-way (80" steel and Lexan) offered the undercarriage for the MJ and the XJ's. The plow blade it's self is not worth much, it's the undercarriage that has the value. Link to comment Share on other sites More sharing options...
banjobill80 Posted November 8, 2009 Author Share Posted November 8, 2009 Thanks guys good info. I belive it must be the factory option by Wildmans acount it seems to be. I do have a bit of damage on the front of the frame rails ( lack of a better word concearning the unibody ) but no tears or major crumpiling just a slight bending downward . I did frame repair and bodywork the first several years out of school and seen far far woarce caused by deer . Thanks again Bill.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now