traitor5150 Posted June 14, 2006 Share Posted June 14, 2006 It's done!!!! can anyone here hlp me post these pics. It's really not 100% i have a new bed I'm working on because this one fell off the back of the trailer going to get painted :( but eveything else is good. New rockers floor pans pretty mutch a full resto. arb locker d44 rar crown vic rear disks advanced adapters sye cv shaft 35's 4.88 gears. And a sick stero. let me know what you guys think Link to comment Share on other sites More sharing options...
Pete M Posted June 14, 2006 Share Posted June 14, 2006 Just copy the IMG tag under you pics and paste them here. Link to comment Share on other sites More sharing options...
mjeff87 Posted June 14, 2006 Share Posted June 14, 2006 Congrats! Looking beastly, to say the least. I'm doing a Crown Vic disk swap onto my '44 as well....might be PM-ing you for some low-down on it :D Jeff Link to comment Share on other sites More sharing options...
ROADLESS Posted June 14, 2006 Share Posted June 14, 2006 I think you did an awesome job. Add some rockers and rock n roll (pun intended) :thumbsup: You can always add paint later or not! Link to comment Share on other sites More sharing options...
attaboybob Posted June 15, 2006 Share Posted June 15, 2006 looks great I like the color(s) :D ...BOB Link to comment Share on other sites More sharing options...
SaharaTJ Posted June 15, 2006 Share Posted June 15, 2006 it looks great, i only noticed one thing that would bug me and thats with the front clip. the fender goes down like 2 inches lower than the front. its nothing bad but would bug me seeing that i do body work and have to line everything up perfectly. may just try trimming like an inch off about 4 inches above the bottom and then reweld it, but that is just what i would do. Link to comment Share on other sites More sharing options...
DirtyComanche Posted June 15, 2006 Share Posted June 15, 2006 it looks great, i only noticed one thing that would bug me and thats with the front clip. the fender goes down like 2 inches lower than the front. its nothing bad but would bug me seeing that i do body work and have to line everything up perfectly. may just try trimming like an inch off about 4 inches above the bottom and then reweld it, but that is just what i would do. That's because he cut it off flush with the bracing. I did that with mine, thought it looked horrible, and took off about 2" more out of the whole fender. Link to comment Share on other sites More sharing options...
MiNi Beast Posted June 18, 2008 Share Posted June 18, 2008 This ride still around? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now