Jump to content
shelbyluvv

Krustyballer Fabrications

Recommended Posts

UPDATE!
Prices have gone up $15 due to having to package everything better now so UPS doesn't destroy or lose something.
Really sucks that I have to do it this way but it's the best way to handle the situation.

(I'll update the 1st post soon)
Thanks

 

Everyone that I've already gave quotes to, your price won't change.

Share this post


Link to post
Share on other sites

Since I bought another Comanche over the weekend,

 

hitches are $15 OFF.

So $185+ shipping!

 

Just because!

Sale lasts until Friday night at midnight.

 

Sent from my HTC One M9 using Tapatalk

Share this post


Link to post
Share on other sites

Review on Krusty's Hitches. 

 

I must say this man does an awesome welding job. The fabrication and shipping was very fast. No damage to the hitch when I received it. The hitch also came with new bolts. I painted the hitch with POR-15 rust proofing when I got it. That is some great stuff by the way. All the dimensions were within spec and everything went on good. Thanks Krusty!

 

Share this post


Link to post
Share on other sites

Messed with the fender flares on the bed armor today. Not sure how I'm wanting to weld them yet... the tacks will be ground down flush and I'll maybe stitch weld around the outside. eba713a14149580ce337c92a1ef5cd5c.jpg1615d08901e9b99c3aef0c5a3748f536.jpgae5ffeff5ef7a17244f6ea3c6838688f.jpg

 

Sent from my HTC One M9 using Tapatalk

Share this post


Link to post
Share on other sites

Messed with the fender flares on the bed armor today. Not sure how I'm wanting to weld them yet... the tacks will be ground down flush and I'll maybe stitch weld around the outside. eba713a14149580ce337c92a1ef5cd5c.jpg1615d08901e9b99c3aef0c5a3748f536.jpgae5ffeff5ef7a17244f6ea3c6838688f.jpg

 

Sent from my HTC One M9 using Tapatalk

patiently waiting with a bag of popcorn.

Share this post


Link to post
Share on other sites

Would anybody be interested in long wheel base sliders if I made them? Since there's 12" more material of each tubing, the cost would be $20-$30 more...

 

Sent from my HTC One M9 using Tapatalk

Share this post


Link to post
Share on other sites

Would anybody be interested in long wheel base sliders if I made them? Since there's 12" more material of each tubing, the cost would be $20-$30 more...

 

Sent from my HTC One M9 using Tapatalk

Most likely.

Share this post


Link to post
Share on other sites

Has anyone gave you feedback on the Fey rear bumpers and how they work with your hitch? My rear bumper is pretty twisted 

Share this post


Link to post
Share on other sites

Has anyone gave you feedback on the Fey rear bumpers and how they work with your hitch? My rear bumper is pretty twisted

They should clear each other. A few others have said they fit. Might be pictures in the hitch page. They should clear any "replacement" bumper really

 

Sent from my HTC One M9 using Tapatalk

Share this post


Link to post
Share on other sites

Not mj but it gets ideas flowing. These are quick little projects to keep me busy. This set and the next couple are for customers. That's my Cherokee but I'm not ready to drill holes in it yet... d29a11a12a543f3d129ceb577a5629ca.jpgbdc3003ea58e3b9d2f94c515e8bb4271.jpg

 

Sent from my HTC One M9 using Tapatalk

Share this post


Link to post
Share on other sites

This happened this weekend... still working on it. Can't decide if I want to run a stock bumper or build one. Bumper is still positioned in factory location. 185717215e47aa5744bb6029ddc2666d.jpgc17e75d39c4255ab9d8dd87d5b49e638.jpg

 

Sent from my HTC One M9 using Tapatalk

Share this post


Link to post
Share on other sites

Short wheel base Comanche bed armor for sale. This is the first and only set I've made so far, prototype set. Same as the rest will be if I do end up selling more.

3" wide flare. Made of 14 gauge steel.

Will come with nutserts if buyer wants them, and 1/4" bolts. Even a drill bit for the nutserts.

 

$400+shipping.

 

They're 74"x13"x7" when they're put back to back. And will probably weigh 75lbs when I've decided how to protect them for shipping.a7397fa0b5a50874a6393cb3d9574252.jpg0c2134cbd6c13fdbdff534bce0b563db.jpgcc1ea31016191bcb1fd44e75188260d1.jpgad34cfa299135eaeb1e0236a5fabea1c.jpg

 

Sent from my HTC One M9 using Tapatalk

Share this post


Link to post
Share on other sites

I can't wait to see these mounted on an mj!   You could be on to something with a bed side wheel well replacement. You may want to consider opening up well and including that for a direct cancer rust bed fix with simple spot welds and an inner front of arch brace and rear inner arch brace.  You do that and mj beds everywhere will have your panels because there is nothing else and repair alternatives are expensive.  I would love to make something like that but I have too many irons in the fire as is.  I am diggn what you have so far though!

Share this post


Link to post
Share on other sites

Winch plate, crossmember, front bumper and rear bumper with a swing out tire and Jerry can carrier for Bo's (shelbyluvv) cj5.
All in the works right now 80e64a14c9016238b4abfcc0b0ab3a28.jpg437c4a477561ce6da53e7a08dca3d570.jpg5077e986e5e1b68fba58557859d31220.jpga06f6a51bb382f73e9f3912ea0ccd904.jpg

Sent from my SM-G892A using Tapatalk

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×