Jump to content

Blower switch


Recommended Posts

I have no air movement in any position of the dial and I have 12v at the blower motor. I got a new resistor just to rule it out, not the problem. Anyone have a part no. for the blower switch with A/C? Thank you.

Link to comment
Share on other sites

Definitely test the motor. One of my XJs I ran the fan right to the battery the first winter.

The motor burned out and took the switch in the dash with it. Melted it pretty good. Far as I know there is no part number just for the blower switch, I had to get the assembly from a junk yard.

 

 

Sent from my iPhone using Tapatalk Pro

Link to comment
Share on other sites

Definitely test the motor. One of my XJs I ran the fan right to the battery the first winter.

The motor burned out and took the switch in the dash with it. Melted it pretty good. Far as I know there is no part number just for the blower switch, I had to get the assembly from a junk yard.

 

 

Sent from my iPhone using Tapatalk Pro

 

The part number for the switch is: 83502719

 

http://www.rockauto.com/en/moreinfo.php?pk=942301&cc=1179996&jsn=403

Link to comment
Share on other sites

 

Definitely test the motor. One of my XJs I ran the fan right to the battery the first winter.

The motor burned out and took the switch in the dash with it. Melted it pretty good. Far as I know there is no part number just for the blower switch, I had to get the assembly from a junk yard.

 

 

Sent from my iPhone using Tapatalk Pro

The part number for the switch is: 83502719

 

http://www.rockauto.com/en/moreinfo.php?pk=942301&cc=1179996&jsn=403

I'll be glad to be wrong, that's not the switch that burned out, or not what mine looked like. Of course it may be part of the early model xj curse. And it's been decades since I hunted for that part.

 

This is not exact but mine burned out the bigger plugs. And I may have my definitions wrong.

 

52690e20caebbfa64d7b5b25fe6a59ec.jpg

 

 

Sent from my iPhone using Tapatalk Pro

Link to comment
Share on other sites

Pulled the blower motor and got the squirrel cage off fairly easy. That thing was just about locked up, very hard to spin by hand. Put the cage back on the new motor and unfortunately had to test it in the dark. Only tried it on low speed but it ran. I will get it installed tomorrow and check that one off the list. Thank you for the help everyone.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...