Door Edge Guards

[HellCreek]

I did a search for this topic and couldn't find anything, so here goes;  is there any such thing as custom fit door edge guards for our trucks?  It would be the same as for an XJ Cherokee door, but I can't seem to find anything except the plastic u-channel on a roll generic type. 

 

Thanks,

Tom

[garyweb3]

Their is (was).I have them on my '87.Bought them from the dealer years ago.They are stainless steal.

[HellCreek]

Hi, Gary,

 

Do you want to sell them?

[fiatslug87]

There are two types I've seen on XJs, the one below and a shorter version that terminates just before the body line changes.

 

[HellCreek]

I like the ones that cover the whole edge, like the ones you have pictured.

[HOrnbrod]

The stainless guards pictured above are Mopar factory accessories, long extinct. However I found a pair on Ebay a few years ago, and they still pop up occasionally.

[Eagle]

There may be some factory door guards on one of my parts XJs. I'll try to look when I'm outside later this afternoon or tomorrow.

[HellCreek]

Thanks, Don, but I have already looked on ebay.

 

Thanks, Eagle. If you happen to come across a set, please let me know.  My e-mail address is tlaher@hellcreeksuspensions.com .

[Eagle]

They are there, but they're on a Pioneer. That has a rubber bumper strip along the lower body line where it flares out, so the edge guards are only the short ones, from the rub strip up to the belt line. If you want 'em, they're yours for shipping. I have no plans for them, and the doors aren't worth saving.

[HellCreek]

Thanks, Eagle.  How much do i owe you for the shipping?

 

Tom

[HellCreek]

Hi, Eagle,

 

Thanks for the offer, but my doors are getting nicked on the lower edge, so these won't help me.  I do need the longer ones.  Does anyone have a set of these they would be willing to sell?

 

Thanks,

Tom