jdougn Posted November 29, 2012 Share Posted November 29, 2012 Napier Precision Products V2-Fender Flares are now available naked! Get our high quality fender flares naked, without any hardware, edge trim, or an installation guide at a ridiculously low price! In fact, through the end of December we've lowered the price on all full sets of our V2 Fender Flares for the Jeep Cherokee XJ & Jeep Comanche MJ. Plus, the discount code still applies! Use the code: CHEROKEE towards the end of the checkout process on our website. Napier Precision Products - Naked Fender Flares All of our cut-out V2 fender flares create maximum room for bigger tires & better articulation. They are made tougher so they can handle the trail, or the mall, better. Plus, according to our customers, not only are they tough but they're the best looking fender flares too! Proudly made in the USA Link to comment Share on other sites More sharing options...
tubpilot Posted January 9, 2013 Share Posted January 9, 2013 Are these a direct fit for Bushwacker flares? I am in need of rear flares to replace my missing Bushwacker flares and would rather not drill any more holes. Link to comment Share on other sites More sharing options...
skidoo_j Posted January 9, 2013 Share Posted January 9, 2013 Anyone on here have these installed? photos of before and after and how much cut off etc.???? Link to comment Share on other sites More sharing options...
92tanMJ Posted April 1, 2013 Share Posted April 1, 2013 If anyone is wondering the discount takes off $29.44 for the MJ flares And arent these the same as the MJ - Off Road V2 Fender Flares? Link to comment Share on other sites More sharing options...
Biotex Posted April 30, 2013 Share Posted April 30, 2013 Is edge trim needed for a proper install? If so, where do I get it so that it is compatable with your flares? The price is good, and I understand trying to keep down costs, but sometimes it is very helpful for a potential buyer to be able to read over an install guide before purchase so I know what I'm getting into. I'm wanting to pull the trigger on a set, but since I have never installed aftermarket flares of any kind before, I need to get a feel for what modifications are involved before hand. Any way to find this stuff out? Link to comment Share on other sites More sharing options...
MuddFoot Posted April 14, 2014 Share Posted April 14, 2014 install instructions on site. they do look great pull the trigger Link to comment Share on other sites More sharing options...
91Pioneer Posted April 14, 2014 Share Posted April 14, 2014 The instructions are on their site: http://www.napierprecisionproducts.com/media/V2%20Quick%20Install%20Guide.pdf They look like a good product but I don't understand why they'd bother selling the flares without hardware & instructions, wouldn't the savings be minimal? Edit: Holy cow, the regular product with hardware & instructions is $373 on sale right now, "naked" is $294. Wow that doesn't make sense to me but... they look good. Link to comment Share on other sites More sharing options...
Alexia Posted April 14, 2014 Share Posted April 14, 2014 Is edge trim needed for a proper install? If so, where do I get it so that it is compatable with your flares? The price is good, and I understand trying to keep down costs, but sometimes it is very helpful for a potential buyer to be able to read over an install guide before purchase so I know what I'm getting into. I'm wanting to pull the trigger on a set, but since I have never installed aftermarket flares of any kind before, I need to get a feel for what modifications are involved before hand. Any way to find this stuff out? I prefer them without the edge trim actually. The edge trim is good at filling small gaps due to body imperfections. Stock flares are very soft and flexible making them easy to contour to the metal. The Napier flares are stiffer and do not flex the same. I spent some time with a belt sander to adjust the fitment on each flare. The instructions are on their site: http://www.napierprecisionproducts.com/media/V2%20Quick%20Install%20Guide.pdf They look like a good product but I don't understand why they'd bother selling the flares without hardware & instructions, wouldn't the savings be minimal? Edit: Holy cow, the regular product with hardware & instructions is $373 on sale right now, "naked" is $294. Wow that doesn't make sense to me but... they look good. I spent $50 on hardware to assemble my own custom kit and that was at wholesale prices. Link to comment Share on other sites More sharing options...
jdougn Posted September 4, 2014 Author Share Posted September 4, 2014 Thanks to Alexia and dainternetguy for responses to questions. I didn't "follow" this thread properly so wasn't getting updates. That should be fixed now. Comanche Club members can get a 10% discount on our flares. Towards the end of the check out process on our website enter the code: Comanche Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now